(no subject)

Post Reply
RICHARD@lynne3.fsnet.co.uk
Posts: 1
Joined: Tue Aug 01, 2000 2:51 pm

(no subject)

Post by RICHARD@lynne3.fsnet.co.uk » Sun Mar 04, 2001 10:22 am


RICHARD@lynne3.fsnet.co.uk
Posts: 1
Joined: Tue Aug 01, 2000 2:51 pm

(no subject)

Post by RICHARD@lynne3.fsnet.co.uk » Sun Mar 04, 2001 10:23 am


rameismer@aol.com
Posts: 24
Joined: Thu Nov 23, 2000 10:33 am

(no subject)

Post by rameismer@aol.com » Fri Mar 16, 2001 10:33 am

I have only been getting 2 or 3 E-mails A day from the list am I missing
some?
Rolland Meismer T.C.#3409-T.D.#5522

CFritz7001@aol.com
Posts: 129
Joined: Mon May 14, 2001 1:58 pm

Re: (no subject)

Post by CFritz7001@aol.com » Fri Mar 16, 2001 11:30 am

Rolland,
I'm in the same condition (not receiving much e-mail via the TABC list),
if that's any indication. However, it may well be that not enough people are
asking questions / offering information to keep the pipeline flowing freely.
(That's a hint, guys !!!)
The only other possibility I can think of is that our TABC transition
from E-Groups to Yahoo may have interfered somehow in some msgs getting
through. However, I'm not comptetent enough in computer stuff to have
anything other than vague suspicions.!!! Maybe Walter or Jim can comment on
that.
Regards,
Carl Fritz
TC 6756
Gainesville, Florida

Paul Huck
Posts: 64
Joined: Wed Nov 15, 2000 9:15 pm

Re: (no subject)

Post by Paul Huck » Fri Mar 16, 2001 7:42 pm

agree
PTH
----- Original Message -----
From:
To:
Cc:
Sent: Friday, March 16, 2001 1:28 PM
Subject: Re: [mg-tabc] (no subject)


> Rolland,
> I'm in the same condition (not receiving much e-mail via the TABC
list),
> if that's any indication. However, it may well be that not enough people
are
> asking questions / offering information to keep the pipeline flowing
freely.
> (That's a hint, guys !!!)
> The only other possibility I can think of is that our TABC transition
> from E-Groups to Yahoo may have interfered somehow in some msgs getting
> through. However, I'm not comptetent enough in computer stuff to have
> anything other than vague suspicions.!!! Maybe Walter or Jim can comment
on
> that.
> Regards,
> Carl Fritz
> TC 6756
> Gainesville, Florida
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

rameismer@aol.com
Posts: 24
Joined: Thu Nov 23, 2000 10:33 am

(no subject)

Post by rameismer@aol.com » Mon Apr 23, 2001 3:15 pm

Jim welcome to the list I have only been a member for 6 mo and it is a good
group. Your town jumped out at me as I had lived in Southport back 1957 while
in the service. and was married at Fairfield. Anyway welcome aboard.

Rolland Meismer T.C. #3409---T.D.#5522

Steve Rankin
Posts: 49
Joined: Sat Feb 14, 2009 11:13 am

(no subject)

Post by Steve Rankin » Sun Apr 29, 2001 12:44 pm

Hi This is my first post to the list. I am near completion of a three year project restoring TC 6646, which last was liscenced in Colorado in 1960. When I started the engine, the rear seal, which is the Moss conversion, leaked like it was a pump, not a seal. If folk want to advise me on what to look for when I strip her down, I'd be aprreciative. I'm on Vancouver Island, B.C. cheers Steve Rankin

Robert Kampas
Posts: 22
Joined: Sun Apr 01, 2001 6:45 pm

(no subject)

Post by Robert Kampas » Thu May 17, 2001 6:06 am

I have received very few emails from the list since last weekend. Can't
believe this group could possibly be that quiet. Has this been the case
with others on the list or is there something @ yahoo groups that is
filtering out email?

Cheers - Bob Kampas

anngene@bellsouth.net
Posts: 12
Joined: Tue Jan 02, 2001 10:41 am

(no subject)

Post by anngene@bellsouth.net » Mon May 21, 2001 10:55 am

David You can get the washers for the pedal shaft from C&C parts in Holland. [He is the fellow who sells also brake parts, cylinders etc.] Wiel Claessen Tel +31 77 477 2454 Fax +31 77 477 1676 PO Box 8350 AB Baarlo The Netherlands Mike
----- Original Message ----- From: dairwin_2000@yahoo.com To: mg-tabc@yahoogroups.com Sent: Monday, May 21, 2001 11:08 AM Subject: [mg-tabc] Thackery washers and track rod springs
Dear all,

Trying to track down a source (preferably a UK source) of two
thackery washers (5/8" ID, 1" OD) for the pedal shafts. And a few
springs that are found in the innards of the trackrod ends?

I have tried B&G and MOSS UK without success (I was told they sell
trackrods ends complete - made in USA).

Any help much appreciated.

DAI




Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

JohnHWSteedman@aol.com
Posts: 45
Joined: Wed Jan 19, 2000 1:11 pm

(no subject)

Post by JohnHWSteedman@aol.com » Thu Jun 14, 2001 9:08 am

Does anyone have a source for the 3/4", swaged P-clips that hold the fuel
line on a TC. Mine are rusted through.

Johnn Steedman TC 0301

Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests