Parts needed

[Alex]

Hey Bud, if you happen to find a deal on two headlamp rings, I need one for my TC. It has a repro on it now. Best of luck to you on your restoration! == Alex in Maine "The Blue Mainie," 1960 Austin Healey 3000 BT7 "Conkling," 1946 MG TC #1321 Former owner 1957 A-H 100-6, 1967 A-H BJ8, 1965 MG Midget http://home.roadrunner.com/~alexmm

----- Original Message ----- From: BUD SILVERS To: MG T-ABC GROUP Sent: Thursday, April 09, 2009 1:22 PM Subject: [mg-tabc] Parts needed Good morning all; As you all know I have bought an early TC that is undergoing restoration. Here is a list of things that I am looking for: 1. Early aluminum original Valve Cover. I would prefer to find an original, but would consider a reproduction if the price is right. I know Moss sells the reproduction ones and may buy one as a last resort. If you have one, please advise if it is original or reproduction, it's condition and price. 2. Pair of front spindles. These can be cracked in the axle. I am going to send them to Bob Grunau and have the axles replaced. 3. Bob Grunau oil filter adapter. 4. Two LED tail light inserts. (Negative Ground) Will probably buy new, but if anyone has some spares let me know. 5. Petronix ignition. (Negative Ground) Not sure which cam I have. Again, I will probably buy this new, but if you have a spare, let me know. 6. Pair of headlight reflectors. 7. Pair of Home Market dipping headlight reflectors. 8. One early headlight ring. I have the lenses and one ring. 9. Good original air cleaner. I have the manifold part and only need the steel air cleaner part. 10. New, used, or rebuilt 6 vane, bronze impeller water pump. 11. MGB fan blade. 12. I will think of more as I go along. I am also in the market for a TIG welder. I have used a Lincoln 175 and would prefer that, but would consider others that might be similar. Please send condition and price if you have something you would sell. If you have any of the above and are looking for something please send me the list and let's see if we can trade. I have not checked Moss or Abingdon for any of the above yet, but will do that soon. If you have any of the above items that you would sell, please contact me off list at mgtc@usaviator.net . Bud Silvers TC 1576 - Low n slo in the Black Forest of Colorado...... TC 8192 - Happily living in California now, but still in my heart and mind...... ---------- ---------- No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 8.0.238 / Virus Database: 270.11.48/2049 - Release Date: 04/09/09 06:09:00 [Non-text portions of this message have been removed]

[Chip Hellie]

Hi Bud, I have a pair of dipping headlight units that I think were out of a TA/TB. Maybe someone knows how to tell which ones are correct, maybe a part number? They are in nice condition. I also have the early square edge type headlight rings. Someone had asked me about them some time ago and I honestly forgot who it was. Sold my valve cover but still have the aluminum part of the aircleaner, or at least the side with the MG logo on it. Sorry but it doesn't sound like I'm much help in the air cleaner dept. Chip Hellie

--- On Thu, 4/9/09, BUD SILVERS 49MGTC@usaviator.net> wrote: From: BUD SILVERS 49MGTC@usaviator.net> Subject: [mg-tabc] Parts needed To: "MG T-ABC GROUP" mg-tabc@yahoogroups.com> Date: Thursday, April 9, 2009, 10:22 AM Good morning all; As you all know I have bought an early TC that is undergoing restoration. Here is a list of things that I am looking for: 1. Early aluminum original Valve Cover. I would prefer to find an original, but would consider a reproduction if the price is right. I know Moss sells the reproduction ones and may buy one as a last resort. If you have one, please advise if it is original or reproduction, it's condition and price. 2. Pair of front spindles. These can be cracked in the axle. I am going to send them to Bob Grunau and have the axles replaced. 3. Bob Grunau oil filter adapter. 4. Two LED tail light inserts. (Negative Ground) Will probably buy new, but if anyone has some spares let me know. 5. Petronix ignition. (Negative Ground) Not sure which cam I have. Again, I will probably buy this new, but if you have a spare, let me know. 6. Pair of headlight reflectors. 7. Pair of Home Market dipping headlight reflectors. 8. One early headlight ring. I have the lenses and one ring. 9. Good original air cleaner. I have the manifold part and only need the steel air cleaner part. 10. New, used, or rebuilt 6 vane, bronze impeller water pump. 11. MGB fan blade. 12. I will think of more as I go along. I am also in the market for a TIG welder. I have used a Lincoln 175 and would prefer that, but would consider others that might be similar. Please send condition and price if you have something you would sell. If you have any of the above and are looking for something please send me the list and let's see if we can trade. I have not checked Moss or Abingdon for any of the above yet, but will do that soon. If you have any of the above items that you would sell, please contact me off list at mgtc@usaviator. net . Bud Silvers TC 1576 - Low n slo in the Black Forest of Colorado.... .. TC 8192 - Happily living in California now, but still in my heart and mind...... [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]

[BUD SILVERS]

Hello all; I am looking for two parts: 1. Inside the pumpkin of a TC is a housing that holds the spider gears. This housing is the part that the ring gear is bolted to. I am looking for this housing or for a TC pumpkin. 2. I am also looking for a Crankshaft pulley. If you have either of the above parts, please contact me off list with condition and price. I have a set of stock TC Ring and Pinion Gears that are for sale. They are in good to fair condition and have no broken teeth. There are some stains on the gears, but show little wear. $300 for the set or make me an offer. As always, I would prefer to trade parts for parts so let me know what you have to trade. Thank you, and Have a great day! Bud Silvers TC 1576 - Low n slo in the Black Forest of Colorado...... [Non-text portions of this message have been removed]

[Carlyle Merritt]

Using TD engine in TC - WOuld anyone have used pipes they could sell - contact me off line at carlyle@merritt-computer.com Moss number 435-450 OIL PIPE, pump to filter 435-460 OIL PIPE, filter to block [Non-text portions of this message have been removed]

[bgrumer]

Can anybody of the members assist? For a restoration project of a 1947 MG TC I need the following parts: Front round cross tube between the front springs attachment, Cross bar supporting the rear of the gearbox, Two rear shock absorbers, Rear shaft "U" check strap with rubber rebounds. Gas pedal and related parts Clutch chain and related parts Thanks Benny