TA water pump

[Diecuts@aol.com]

Hi Joe,

Is this the same fellow who has been working on my SA water pump??

Still no rush...sometime in July.

Cheers, Lee


[Non-text portions of this message have been removed]

[joecurto@aol.com]

No it is not.

Curto


[Non-text portions of this message have been removed]

[Robert F. Butson.]

If anyone out there has taken a TA water pump apart, can they tell me if
there should be a felt seal between the dished washer under the pulley and
the front bearing. Similarly is there a felt washer the other side of the
bearing and the adjacent dished washer. There is obviously one between this
latter dished washer and the flat washer before the circlip. Many thanks.
Bob Wales UK.

[Doug Pelton]

Hi Kent & All,  I have the TA water pump in stock, rebuilt ready to install, item # CS001, $355 with core exchange.  Also note, I have expanded my inventory to include TA/TB and have most every component for these as well. FTFU s business charter is to fully support all TABC cars.  Best regards,  Doug Pelton, ProprietorFrom The Frame Up480-588-8185For Fastest Service:  order@fromtheframeup.comLike us on FACEBOOK! See us on YouTUBE!  www.FromTheFrameUp.com  From: mg-tabc@yahoogroups.com [mailto:mg-tabc@yahoogroups.com] On Behalf Of kjacoby@roadrunner.com [mg-tabc]
Sent: Friday, July 28, 2017 6:27 PM
To: mg-tabc@yahoogroups.com
Subject: [mg-tabc] Leaky TA   



Does anyone have a good source for rebuilding of a TA water pump?

Not a unique problem to my #1501's pump, as I understand.

A location in the states if possible, would be helpful.

Alternatively, if anyone has DIY instructions, I'd be interested

in pursuing that route as well.


Thanks in advance for your help,

Kent

Erie, Pennsylvania
Virus-free. www.avast.com