Re: Gas Measurements

Donald Wilkinson
Posts: 108
Joined: Wed Mar 13, 2002 9:01 am

Re: Gas Measurements

Post by Donald Wilkinson » Thu Sep 08, 2005 10:11 pm

this is true.

Don


With enough Brit sized pints on board, you can correlate with anyone.

John S. Rode


-----Original Message-----
From: Donald Wilkinson
To: LuckyFloridaLin@aol.com; mg-tabc@yahoogroups.com
Sent: Thu, 08 Sep 2005 14:44:45 +0000
Subject: RE: [mg-tabc] Gas Measurements

Hey Thom:

RE:
>Gad:
but how do we correlate with US pints.
Thom Mudd<

digitaldon points out that here on the Niagara Frontier (with Canada), real
Brit sized pints (20 oz.), are readily available at the nearest waterfront
pub at the corner of Black Creek and the Niagara River, about a ten minute
run from digitaldon's marina on Grand Island. Eat yer hearts out, chaps.

Tally Ho!
Don

Liz Harris
Posts: 27
Joined: Sun Mar 13, 2005 3:29 pm

Re: Gas Measurements

Post by Liz Harris » Fri Sep 09, 2005 12:41 am

.......Brilliant Ross...I love it!!......don`t think I wanna know about capacities on that one....
Tweed
TC 2259 Cambridge UK.


ROSS TAYLOR wrote:
I would like to inform the mob that a "TRANNIE "DOWN UNDER IS A BLOKE
DRESSED UP AS A SHIELIA"

Ross
>Hey there Doug,
>
>Yes, fill till it overflows per the book. But it does not mean overflowing
>out the axle hubs, or overflowing out the fill opening. On the right side
>of the pumkin is a hex head plug at a level approximately even with the
>bottom of the axle tubes. Remove that plug and pour your oil in the fill
>opening on the left side of the pumkin till oil overflows out the lower
>plug
>opening.
>
>David Edgar, TC 5108
>El Cajon, California
>
>
>On 9/7/05 8:18 PM, "DougPulver@aol.com" wrote:
>
> > Yikes,
> >
> > I thought the book said to fill to overflowing? Hopefully you guys will
>have a
> > good answer for this one.
> >
> > Doug Pulver
> > TC 5850
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>




Yahoo! Groups Links









---------------------------------
To help you stay safe and secure online, we've developed the all new Yahoo! Security Centre.

[Non-text portions of this message have been removed]

Tom
Posts: 57
Joined: Thu Jan 14, 2010 9:51 pm

Re: Gas Measurements

Post by Tom » Fri Sep 09, 2005 8:18 am

Is that because the drive shft is attached?

----- Original Message -----
From: "ROSS TAYLOR"
To: ;
Sent: Thursday, September 08, 2005 8:29 PM
Subject: Re: [mg-tabc] Gas Measurements


>I would like to inform the mob that a "TRANNIE "DOWN UNDER IS A BLOKE
> DRESSED UP AS A SHIELIA"
>
> Ross
>
>>Hey there Doug,
>>
>>Yes, fill till it overflows per the book. But it does not mean
>>overflowing
>>out the axle hubs, or overflowing out the fill opening. On the right side
>>of the pumkin is a hex head plug at a level approximately even with the
>>bottom of the axle tubes. Remove that plug and pour your oil in the fill
>>opening on the left side of the pumkin till oil overflows out the lower
>>plug
>>opening.
>>
>>David Edgar, TC 5108
>>El Cajon, California
>>
>>
>>On 9/7/05 8:18 PM, "DougPulver@aol.com" wrote:
>>
>> > Yikes,
>> >
>> > I thought the book said to fill to overflowing? Hopefully you guys will
>>have a
>> > good answer for this one.
>> >
>> > Doug Pulver
>> > TC 5850
>>
>>
>>
>>
>>Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests