Brake problems

[Peter Roberts]

Hi Banjo! Glad you shared your experience with everyone. This mis-manufacture is not uncommon. Your experience should serve as a caution to anyone buying and fitting safety-critical parts. _Peter

----- Original Message ----- From: banjomey2@aol.com To: mg-tabc@yahoogroups.com Sent: Saturday, August 19, 2006 6:26 AM Subject: [mg-tabc] Brake problems Hi Peter, looks like you solved my brake-problems with your advice to check the piston of the MC. I took the MC out agian (bought from Moss Europe), checked the piston on compared it with the piston of the old MC. The new piston is about 2mm longer than the one of the old unit and will block the relief hole. I haven't put everything together yet but I am quite shure my brake-problems might be solved. Thanks again Peter "Banjo" Meyer TC 9027, 1949 Morgan +4, 1965 TR 3A, 1959 Rilye TT Sprite Special, 1935 [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]