Re: [mg-tabc] Prewar bits

[Viv James TraX Interconnect (Pty.) Ltd]

Hello Harry,

I was interested to see that you have loads of prewar bits. My next
project (after the cream TC which should be finished this year) is a
'35 PA last driven in '64. I am short of a complete bonnet, inlet
manifold (this car was blown for its whole life but the blower has
gone) fuel filler and generator cut out lid, round tail lamps plus who
knows what else. Can you help? The rest of the car is complete
and unlike my current TC project which came in 3 truck loads, is
all together and on its wheels. It took me 10 years to wheedle it out
of the previous owner!

I also need 2 front shocks for my cream TC. This is proving to be a
bit of a problem.

Rgds

Viv.

PS Have spent most of Easter setting up wheels for 2 cars. You
get quite good at this after 10 wheels.

[Mark McCombs]

Hey, Viv-
That space junk didnt hit your garage, did it?

Regards from the safe midwest US,
Mark
-----Original Message-----
From: Viv James TraX Interconnect (Pty.) Ltd
To: pyleharrydeidre@bigpond.com
Cc: mg-tabc@egroups.com
Date: Tuesday, May 02, 2000 3:03 AM
Subject: [mg-tabc] Prewar bits

>Hello Harry,
>
>I was interested to see that you have loads of prewar bits. My next
>project (after the cream TC which should be finished this year) is a
>'35 PA last driven in '64. I am short of a complete bonnet, inlet
>manifold (this car was blown for its whole life but the blower has
>gone) fuel filler and generator cut out lid, round tail lamps plus who
>knows what else. Can you help? The rest of the car is complete
>and unlike my current TC project which came in 3 truck loads, is
>all together and on its wheels. It took me 10 years to wheedle it out
>of the previous owner!
>
>I also need 2 front shocks for my cream TC. This is proving to be a
>bit of a problem.
>
>Rgds
>
>Viv.
>
>PS Have spent most of Easter setting up wheels for 2 cars. You
>get quite good at this after 10 wheels.
>
>
>
>