Vinyl for TC dash

[Carlyle Merritt]

Has anyone ever glued vinyl to TC dash.

[Mark & Sheila Masters]

Yuk!MarkNZ

On 25 Apr 2019, at 09:40, Carlyle Merritt carlyle@merritt-computer.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote: Has anyone ever glued vinyl to TC dash.

[Mark M]

3M spray adhesive    

----- Original Message ----- [b]From:[/b] rmmasters@xtra.co.nz [mg-tabc] [b]To:[/b] carlyle@merritt-computer.com [b]Cc:[/b] mg-tabc@yahoogroups.com [b]Sent:[/b] Wednesday, April 24, 2019 6:34 PM [b]Subject:[/b] Re: [mg-tabc] Vinyl for TC dash   Yuk! Mark NZ On 25 Apr 2019, at 09:40, Carlyle Merritt carlyle@merritt-computer.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote: Has anyone ever glued vinyl to TC dash.

[areshke]

Gee, Carlyle, that's probably one of the more basic tasks of any restoration. Yes, I have done that more than a few times. Spray can adhesive is the main ingredient; but the more complex part of the job is to get the vinyl evenly laid and being careful to cut the openings for the instruments without creating any gaps once the instruments are installed. It's a painstaking process so take your time. Maybe buy more vinyl than you need in case of mistakes. Andy in Sacramento I On 4/24/2019 2:40 PM, Carlyle Merritt carlyle@merritt-computer.com [mg-tabc] wrote:

Has anyone ever glued vinyl to TC dash.

[Norman Verona]

Carlyle,

 

Look at my blog on my rebuild and I think I describe and photographed how I did it. I m in a rush now so can t spend time finding it but I seem to remember it was Nov-Dec time.

 

www.frenchblat.com the MG TC

 

[b][u]Norman Verona aka "Email Norman"[/u][/b]

11 Cherry close, Royston, S71 4LZ

Mob: 0741 9905 741

Web: www.frenchblat.com

 

[b]From:[/b] mg-tabc@yahoogroups.com mg-tabc@yahoogroups.com> [b]On Behalf Of [/b]apreshke@comcast.net [mg-tabc] [b]Sent:[/b] 25 April 2019 01:13 [b]To:[/b] Carlyle Merritt carlyle@merritt-computer.com>; mg-tabc@yahoogroups.com [b]Subject:[/b] Re: [mg-tabc] Vinyl for TC dash

 

 

Gee, Carlyle, that's probably one of the more basic tasks of any restoration.  Yes, I have done that more than a few times.  Spray can adhesive is the main ingredient; but the more complex part of the job is to get the vinyl evenly laid and being careful to cut the openings for the instruments without creating any gaps once the instruments are installed.  It's a painstaking process so take your time.  Maybe buy more vinyl than you need in case of mistakes. Andy in Sacramento I On 4/24/2019 2:40 PM, Carlyle Merritt carlyle@merritt-computer.com [mg-tabc] wrote:

 

Has anyone ever glued vinyl to TC dash.

[Norman Verona]

Carlyle, OK, found it, it s September.

 

[b][u]Norman Verona aka "Email Norman"[/u][/b]

11 Cherry close, Royston, S71 4LZ

Mob: 0741 9905 741

Web: www.frenchblat.com

 

[b]From:[/b] mg-tabc@yahoogroups.com mg-tabc@yahoogroups.com> [b]On Behalf Of [/b]apreshke@comcast.net [mg-tabc] [b]Sent:[/b] 25 April 2019 01:13 [b]To:[/b] Carlyle Merritt carlyle@merritt-computer.com>; mg-tabc@yahoogroups.com [b]Subject:[/b] Re: [mg-tabc] Vinyl for TC dash

 

 

Gee, Carlyle, that's probably one of the more basic tasks of any restoration.  Yes, I have done that more than a few times.  Spray can adhesive is the main ingredient; but the more complex part of the job is to get the vinyl evenly laid and being careful to cut the openings for the instruments without creating any gaps once the instruments are installed.  It's a painstaking process so take your time.  Maybe buy more vinyl than you need in case of mistakes. Andy in Sacramento I On 4/24/2019 2:40 PM, Carlyle Merritt carlyle@merritt-computer.com [mg-tabc] wrote:

 

Has anyone ever glued vinyl to TC dash.