TA fan spacer
-
- Posts: 9
- Joined: Sun Oct 08, 2017 11:40 am
TA fan spacer
I am installing a fan blade spacer for the first time on TA 2335. The original crumbled when I took it off. There is a small grease nipple on the spacer. Before installing should I place some grease or oil on the inside? There does not appear to be anything that needs lubrication but the nipple is there for some reason Thanks, Mark O'Day
ThThanks,
Mark O Dayurst time on TA 2335
-
- Posts: 57
- Joined: Sun Dec 21, 2003 12:27 pm
Re: TA fan spacer
Hi Mark, I believe the front bearing of the water pump was greased using the greaser and spacer set-up along with a sealed cap over which the fan blades were fitted. So if your water pump has sealed bearings, then the greaser is cosmetic only. If you find you need a TA water pump or associated parts, I have these in stock. My water pumps have all new internals and the sealed bearings. Let me know if I can help further. [b][i]Doug Pelton,[/i][/b] ProprietorFrom The Frame Up480-588-8185For Fastest Service: order@fromtheframeup.comLike us on FACEBOOK! See us on YouTUBE! www.FromTheFrameUp.com [b]From:[/b] mg-tabc@yahoogroups.com [mailto:mg-tabc@yahoogroups.com] [b]On Behalf Of [/b]Mark O'Day 23 47tc23@comcast.net [mg-tabc]
[b]Sent:[/b] Sunday, October 8, 2017 12:40 PM
[b]To:[/b] T-ABC mg-tabc@yahoogroups.com>
[b]Cc:[/b] Mark O'Day 23 47tc23@comcast.net>
[b]Subject:[/b] [mg-tabc] TA fan spacer
I am installing a fan blade spacer for the first time on TA 2335. The original crumbled when I took it off. There is a small grease nipple on the spacer. Before installing should I place some grease or oil on the inside? There does not appear to be anything that needs lubrication but the nipple is there for some reason Thanks, Mark O'Day ThThanks, Mark O Dayurst time on TA 2335
[img]https://ec.yimg.com/ec?url=https%3A%2F%2Fipmcdn.avast.com%2Fimages%2Ficons%2Ficon-envelope-tick-round-orange-animated-no-repeat-v1.gif&t=1522511816&sig=UAki1oh2GSv.3eqE6umgwg--~D[/img] Virus-free. www.avast.com
Who is online
Users browsing this forum: No registered users and 17 guests