K&N Racing -Quality Lifetime Air Filter for the TC

[LuckyFloridaLin@aol.com]

Dear Lads and Lassies; Some of us have the coffee can air filter with a removable top. After much research I found a perfect filter insert suitable for installation. It is High-Flow filter used in racing and off road. Filter number is: RC-4340 Caveat: Check all dimensions in case of variability of ye olde coffe cans. The air filter is domed shaped,with a flat topped metal cap and the top is just below the rectangular air openings. For Simulation of Originality, the steel wool can be inserted on the top. The filter's rubber bottom fits perfectly over the intake lip of the Carb manifold and comes with a clamp for filter security I did have to wait awhile for K&N to put this filter into production but I believe they are now avalable. My thanks to K&N for putting this filter back into production. Try to take advantage of this mavelous filter that is so perfect for insuring the longevity of our XPAG engines Tally Ho! Thom Collins [Non-text portions of this message have been removed]

[Ray]

The filters below described are available now online at http://www.4filters.com/replacement_filters.htm . Cost is 39.90 Snail address is:FOX Performance, 21999 Van Buren St., Suite 6, Grand Terrace, CA 92313 USA Phone-909.824.8008 Best, Ray

> Dear Lads and Lassies; Some of us have the coffee can air filter with a > removable top. After much research I found a perfect filter insert

suitable

> for installation. It is High-Flow filter used in racing and off road.

Filter

> number is: RC-4340 > > Caveat: Check all dimensions in case of variability of ye olde coffe

cans.

> The air filter is domed shaped,with a flat topped metal cap and the top is > just below the rectangular air openings. For Simulation of Originality,

the

> steel wool can be inserted on the top. > The filter's rubber bottom fits perfectly over the intake lip of the

Carb

> manifold and comes with a clamp for filter security I did have to wait

awhile

> for K&N to put this filter into production but I believe they are now > avalable. My thanks to K&N for putting this filter back into production. > Try to take advantage of this mavelous filter that is so perfect for

insuring

> the longevity of our XPAG engines > Tally Ho! Thom Collins