Control Box RF95 repairs

[Bill Hentzen]

Looking for some help, please. I have a sick voltage regulator and a couple of spares that should be checked. Any suggestions as to who could help? Thanks! Bill Hentzen

[Dean Jensen]

Hi Bill It is possible to unsolder the innards of a new one, and unsolder the innards of your old one, and it will work fine. No one will know the difference unless they take to top off, or take the whole thing off and see the bottom. It is not that hard to do Cheers Dean -----Original Message----- From: Bill Hentzen [mailto:bill@rangelinemews.com] Sent: Tuesday, May 21, 2002 4:24 PM To: mg-tabc@yahoogroups.com Subject: [mg-tabc] Control Box RF95 repairs Looking for some help, please. I have a sick voltage regulator and a couple of spares that should be checked. Any suggestions as to who could help? Thanks! Bill Hentzen Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

[David & Joyce Edgar]

>I have a sick voltage regulator and a couple of spares that should >be checked.

Bill, Like Dean said, it is easy to take the guts from a newer Lucas regulator and put them in to the 9 post shell. I did it to my TC. If however you aren't up to doing that yourself then Jerry Felper from this list can help you out with anything electrical. He operates British Auto Electric in the Southern California area. email: felperg@earthlink.net He has helped me with several items beyond my capabilities and was fast and reasonable. David Edgar, TC 5108 El Cajon, California

[Carlyle Merritt]

Bill Hentzen I had University Motors rebuild my regulator for the TC - They put newer MGB reulator parts in it. Works fine. Carlyle