Ignition / Lighting switch / EXU

[George Arber]

The wiring diagrams that I have show four connections marked :- A , IG , H and T . However , on wiring up the ignition / lighting switch on our EXU I note that it has an additional fifth terminal marked ' L ' . Maybe I am missing the obvious but I cannot find any other wire to take from or to this ' L ' terminal. Normally a terminal marked ' L' would denote a ' Live ' terminal. Any ideas ? George TC 7548 EXU

[seabrook@en.com]

George & Group, The "L" terminal is not used on the PLC ignition-headlamp switch. I do not think that it stands for "Live" either. It is just there. Craig Seabrook Whitworth Shop TC/0911 George Arber wrote:

> > The wiring diagrams that I have show four connections marked :- A , IG , H > and T . However , on wiring up the ignition / lighting switch on our EXU I > note that it has an additional fifth terminal marked ' L ' . Maybe I am > missing the obvious but I cannot find any other wire to take from or to this > ' L ' terminal. Normally a terminal marked ' L' would denote a ' Live ' > terminal. > > Any ideas ? > > George TC 7548 EXU > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/