TB Seat Back Brackets

[Viv James TraX Interconnect (Pty.) Ltd]

We need some advice from TB experts:- My friend Feliciano who is getting on well with his TB needs to know the layout of his seat-back adjusting system. On the TC, the 2 brackets are riveted onto the wheel arches. On the PA, they are screwed onto the body tub sides. What is the arrangement on the TB? VivJ

[John G. Bulcken IV]

Viv, The TA and TB have the same set up. It is a bit different than the TC as it mounts to the side of the wheel well on each side and not the top. NTG and Naylor have the correct adjusters if these are missing, although I can not confirm the quality as I was lucky enough to have my originals. Hope this helps. Cheers, John TB#0398

----- Original Message ----- From: "Viv James TraX Interconnect (Pty.) Ltd" viv@trax.co.za> To: mg-tabc@yahoogroups.com> Sent: Tuesday, February 05, 2002 12:45 AM Subject: [mg-tabc] TB Seat Back Brackets > We need some advice from TB experts:- > My friend Feliciano who is getting on well with his TB needs to know > the layout of his seat-back adjusting system. > On the TC, the 2 brackets are riveted onto the wheel arches. > On the PA, they are screwed onto the body tub sides. > What is the arrangement on the TB? > > VivJ > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >