parts needed for valve adjustments ?

[Eddie]

 

Hi, Chris! Couldn t help notice your post is addressed to the[u] DR650 [/u]list and the[u] KLR650[/u] group. For the Suzuki, since someone s pointed out it is a screw & locknut type adjustment, the only things you need are normal hand tools. No shims to buy. If you have a KLR, you will also need a inch pound torque wrench for the cam caps(go easy!!!) + an assortment of shims, too. You d also need something to clean the valve cover gasket area (brake cleaner & a lint-free rag?) plus some sealant for the corners of the cam plug parts of the gasket. -eddie

 

[b]From: [/b]DSN_KLR650@yahoogroups.com [b]Sent: [/b]Saturday, July 22, 2017 2:54 PM [b]To: [/b]dsn_klr650@yahoogroups.com [b]Subject: [/b][DSN_KLR650] Parts needed for valve adjustments ?

 

 

Is there anything to buy ? Near Spokane,  heading for Coeur D'Alene Chris

 

[zoot .]

Airbox is soaked. Any chance the part no 14067-006 is a de facto PCV valve, or have the years of storage prior to my ownership shot the rings?