login

DSN_KLR650
Post Reply
RobertWichert
Posts: 697
Joined: Sun Jan 10, 2010 11:32 am

handlebar

Post by RobertWichert » Fri Dec 09, 2016 8:30 pm

Season's greetings to all! I have a red '07 KLR 650 and I am thinking about changing out the handlebar. I ride mostly on the asphalt. Almost every day. But I have knobbies on it and I do ride on dirt occasionally. Can any of you recommend a good/better/best replacement handlebar? Mine is a bit bent from some drops and at least one crash. I'd like something lighter, if possible, and not much different than stock, but aluminum would be my choice and maybe even red, if somebody makes one. What do y'all think? -- Robert P. Wichert P.Eng. LEED AP CEPE CEA HERS I/II BPI BA +1 916 966 9060 FAX +1 916 966 9068

achesley43@ymail.com
Posts: 262
Joined: Sun Mar 11, 2012 8:16 pm

login

Post by achesley43@ymail.com » Sat Dec 10, 2016 4:33 am

I went with some ROX anti vibe 2 in extenders and an old set of DRZ 400 bars I had from years back Not sure of the exact bend on them but much straighter than the KLR OEMs for sure. More of a typical MX bend.  Really satisfied with the results even after a few thousand miles with them. 

jeffsaline
Posts: 54
Joined: Tue Jan 16, 2007 9:37 am

handlebar

Post by jeffsaline » Sat Dec 10, 2016 8:52 am

On Fri, 9 Dec 2016 18:21:55 -0800 "RobertWichert robert@... [DSN_KLR650]" DSN_KLR650@yahoogroups.com> writes: Season's greetings to all! I have a red '07 KLR 650 and I am thinking about changing out the handlebar. I ride mostly on the asphalt. Almost every day. But I have knobbies on it and I do ride on dirt occasionally. Can any of you recommend a good/better/best replacement handlebar? Mine is a bit bent from some drops and at least one crash. I'd like something lighter, if possible, and not much different than stock, but aluminum would be my choice and maybe even red, if somebody makes one. What do y'all think? -- Robert P. Wichert P.Eng. LEED AP CEPE CEA HERS I/II BPI BA +1 916 966 9060 FAX +1 916 966 9068 <><><><><><><> <><><><><><><> Robert, I have Renthal 666 bars on my 03 KLR650. I also added Rox risers a few years later when I found a fair deal for a used pair. The 666 bars pretty much match the stock bars for bend, rise and pullback. I've been unable to bend them. Best, Jeff Saline The Beautiful Black Hills of South Dakota 75 R90/6, 03 KLR650 . . . . . . . ____________________________________________________________ Affordable Wireless Plans Set up is easy. Get online in minutes. Starting at only $14.95 per month! www.netzero.net?refcd=nzmem0216>

RobertWichert
Posts: 697
Joined: Sun Jan 10, 2010 11:32 am

handlebar

Post by RobertWichert » Sat Dec 10, 2016 10:14 am

Thanks, Jeff! Robert P. Wichert P.Eng. LEED AP BD&C HERS I & HERS II CEPE & CEA RES & NON-RES +1 916 966 9060 FAX +1 916 966 9068
> On Dec 10, 2016, at 6:46 AM, wrote: > > On Fri, 9 Dec 2016 18:21:55 -0800 "RobertWichert robert@... > [DSN_KLR650]" DSN_KLR650@yahoogroups.com> writes: > Season's greetings to all! > > I have a red '07 KLR 650 and I am thinking about changing out the > handlebar. I ride mostly on the asphalt. Almost every day. But I have > knobbies on it and I do ride on dirt occasionally. > > Can any of you recommend a good/better/best replacement handlebar? Mine > is a bit bent from some drops and at least one crash. I'd like > something lighter, if possible, and not much different than stock, but > aluminum would be my choice and maybe even red, if somebody makes one. > > What do y'all think? > -- > Robert P. Wichert P.Eng. LEED AP > CEPE CEA HERS I/II BPI BA > +1 916 966 9060 > FAX +1 916 966 9068 > <><><><><><><> > <><><><><><><> > > Robert, > > I have Renthal 666 bars on my 03 KLR650. I also added Rox risers a few > years later when I found a fair deal for a used pair. The 666 bars > pretty much match the stock bars for bend, rise and pullback. I've been > unable to bend them. > > Best, > > Jeff Saline > The Beautiful Black Hills of South Dakota > 75 R90/6, 03 KLR650 > > . > . > . > . > . > . > . > > > ____________________________________________________________ > Affordable Wireless Plans > Set up is easy. Get online in minutes. > Starting at only $14.95 per month! > www.netzero.net?refcd=nzmem0216

zoot .
Posts: 23
Joined: Wed Nov 20, 2013 9:17 pm

handlebar

Post by zoot . » Sat Dec 10, 2016 1:35 pm

Had Fred recommend the Pro Taper bars with ATV bend (I" higher) some years ago.  Like that the increased taper gives me options for positioning to my comfort. Todd On 12/9/2016 6:21 PM, RobertWichert robert@... [DSN_KLR650] wrote:
  Season's greetings to all! I have a red '07 KLR 650 and I am thinking about changing out the handlebar. I ride mostly on the asphalt. Almost every day. But I have knobbies on it and I do ride on dirt occasionally. Can any of you recommend a good/better/best replacement handlebar? Mine is a bit bent from some drops and at least one crash. I'd like something lighter, if possible, and not much different than stock, but aluminum would be my choice and maybe even red, if somebody makes one. What do y'all think? -- Robert P. Wichert P.Eng. LEED AP CEPE CEA HERS I/II BPI BA +1 916 966 9060 FAX +1 916 966 9068

Post Reply

Who is online

Users browsing this forum: No registered users and 105 guests