Wilsons Sandbox

If it's gen 1 plastic, I'd try West System G-flex. Mark

On Thu, May 19, 2016 at 10:56 AM, T zootpatutie@... [DSN_KLR650] DSN_KLR650@yahoogroups.com> wrote: Did an unscheduled dismount (story posted at Fazedbook if interested), and broke the shroud corner plastic. Have any y'all come up with the miracle patch fix? Suspect the plastic melt reattachment would crack at the post pin attachment. Anyone try fiberglass patch/resin combination with success? Thanks, Todd ------------------------------------ Posted by: T ------------------------------------ List Sponsors - Dual Sport News: http://www.dualsportnews.com Arrowhead Motorsports: http://www.arrowheadmotorsports.com List FAQ courtesy of Chris Krok: http://www.bigcee.com/klr650faq.html Members Map https://maps.google.com/maps/ms?msid=212558560286766214899.0004d0fa9f1732283bb6f&msa=0&ll=38.522384,-109.489746&spn=6.831383,9.624023 ------------------------------------ Yahoo Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/DSN_KLR650/ Your email settings: Individual Email | Traditional To change settings online go to: http://groups.yahoo.com/group/DSN_KLR650/join (Yahoo! ID required) To change settings via email: DSN_KLR650-digest@yahoogroups.com DSN_KLR650-fullfeatured@yahoogroups.com To unsubscribe from this group, send an email to: DSN_KLR650-unsubscribe@yahoogroups.com Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/

https://www.youtube.com/watch?v=2a5RlcP-4JE>

On Thu, May 19, 2016 at 11:13 AM, Mark Van Horn wrote: If it's gen 1 plastic, I'd try West System G-flex. Mark On Thu, May 19, 2016 at 10:56 AM, T zootpatutie@... [DSN_KLR650] DSN_KLR650@yahoogroups.com> wrote: Did an unscheduled dismount (story posted at Fazedbook if interested), and broke the shroud corner plastic. Have any y'all come up with the miracle patch fix? Suspect the plastic melt reattachment would crack at the post pin attachment. Anyone try fiberglass patch/resin combination with success? Thanks, Todd ------------------------------------ Posted by: T ------------------------------------ List Sponsors - Dual Sport News: http://www.dualsportnews.com Arrowhead Motorsports: http://www.arrowheadmotorsports.com List FAQ courtesy of Chris Krok: http://www.bigcee.com/klr650faq.html Members Map https://maps.google.com/maps/ms?msid=212558560286766214899.0004d0fa9f1732283bb6f&msa=0&ll=38.522384,-109.489746&spn=6.831383,9.624023 ------------------------------------ Yahoo Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/DSN_KLR650/ Your email settings: Individual Email | Traditional To change settings online go to: http://groups.yahoo.com/group/DSN_KLR650/join (Yahoo! ID required) To change settings via email: DSN_KLR650-digest@yahoogroups.com DSN_KLR650-fullfeatured@yahoogroups.com To unsubscribe from this group, send an email to: DSN_KLR650-unsubscribe@yahoogroups.com Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/

Not sure what year or where the break is, but I'd scuff up the area with coarse sandpaper, and JB Weld a small piece of aluminum on the back side. Scuff up the aluminum as well. If not J-B Weld, use some plastic epoxy. I've tried both repairs with good results. Ryan Newman -------- Original message --------From: "Mark Van Horn kl650b2@... [DSN_KLR650]" DSN_KLR650@yahoogroups.com> Date: 5/19/16 8:13 AM (GMT-07:00) To: DSN_KLR650@yahoogroups.com, T Subject: Re: [DSN_KLR650] Miracle plastic repair?   If it's gen 1 plastic, I'd try West System G-flex. Mark

On Thu, May 19, 2016 at 10:56 AM, T zootpatutie@... [DSN_KLR650] DSN_KLR650@yahoogroups.com> wrote: Did an unscheduled dismount (story posted at Fazedbook if interested), and broke the shroud corner plastic.  Have any y'all come up with the miracle patch fix?  Suspect the plastic melt reattachment would crack at the post pin attachment.  Anyone try fiberglass patch/resin combination with success? Thanks, Todd ------------------------------------ Posted by: T ------------------------------------ List Sponsors - Dual Sport News: http://www.dualsportnews.com Arrowhead Motorsports: http://www.arrowheadmotorsports.com List FAQ courtesy of Chris Krok: http://www.bigcee.com/klr650faq.html Members Map https://maps.google.com/maps/ms?msid=212558560286766214899.0004d0fa9f1732283bb6f&msa=0&ll=38.522384,-109.489746&spn=6.831383,9.624023 ------------------------------------ Yahoo Groups Links To visit your group on the web, go to:     http://groups.yahoo.com/group/DSN_KLR650/ Your email settings:     Individual Email | Traditional To change settings online go to:     http://groups.yahoo.com/group/DSN_KLR650/join     (Yahoo! ID required) To change settings via email:     DSN_KLR650-digest@yahoogroups.com     DSN_KLR650-fullfeatured@yahoogroups.com To unsubscribe from this group, send an email to:     DSN_KLR650-unsubscribe@yahoogroups.com Your use of Yahoo Groups is subject to:     https://info.yahoo.com/legal/us/yahoo/utos/terms/

zoot-I have repaired some bike plastics with super glue and baking soda sprinkled over the joint.NOTE: the reaction gets really hot.There are UTube tutorials out there; watch a couple prior to trying it out.Most of the tutorials are about modelers making seamless joints...the plastic is also a different formula than KHI plastics. THIS solution: It works on some Kawasaki plastic, some it does not.I repaired a 2007 KLX250 side panel and it was holding after 3 years.I repaired a 2001 KLR650 brush guard...no so good. shrug. It held until I dropped the bike on the same brushguard, however, in only broke on the repaired seam. It all depends on the plastic formula....revmaaatin.

On Thu, May 19, 2016 at 8:56 AM, T zootpatutie@... [DSN_KLR650] DSN_KLR650@yahoogroups.com> wrote: Did an unscheduled dismount (story posted at Fazedbook if interested), and broke the shroud corner plastic. Have any y'all come up with the miracle patch fix? Suspect the plastic melt reattachment would crack at the post pin attachment. Anyone try fiberglass patch/resin combination with success? Thanks, Todd ------------------------------------ Posted by: T ------------------------------------ List Sponsors - Dual Sport News: http://www.dualsportnews.com Arrowhead Motorsports: http://www.arrowheadmotorsports.com List FAQ courtesy of Chris Krok: http://www.bigcee.com/klr650faq.html Members Map https://maps.google.com/maps/ms?msid=212558560286766214899.0004d0fa9f1732283bb6f&msa=0&ll=38.522384,-109.489746&spn=6.831383,9.624023 ------------------------------------ Yahoo Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/DSN_KLR650/ Your email settings: Individual Email | Traditional To change settings online go to: http://groups.yahoo.com/group/DSN_KLR650/join (Yahoo! ID required) To change settings via email: DSN_KLR650-digest@yahoogroups.com DSN_KLR650-fullfeatured@yahoogroups.com To unsubscribe from this group, send an email to: DSN_KLR650-unsubscribe@yahoogroups.com Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/

Thank you each for the resources. Appreciate the possibilities. t. On 5/19/2016 8:50 AM, Martin Earl mjearl4@... [DSN_KLR650] wrote:

zoot- I have repaired some bike plastics with super glue and baking soda sprinkled over the joint. NOTE: the reaction gets really hot. There are UTube tutorials out there; watch a couple prior to trying it out. Most of the tutorials are about modelers making seamless joints...the plastic is also a different formula than KHI plastics. THIS solution: It works on some Kawasaki plastic, some it does not. I repaired a 2007 KLX250 side panel and it was holding after 3 years. I repaired a 2001 KLR650 brush guard...no so good. shrug. It held until I dropped the bike on the same brushguard, however, in only broke on the repaired seam. It all depends on the plastic formula.... revmaaatin. On Thu, May 19, 2016 at 8:56 AM, T zootpatutie@... [DSN_KLR650] DSN_KLR650@yahoogroups.com> wrote: Did an unscheduled dismount (story posted at Fazedbook if interested), and broke the shroud corner plastic. Have any y'all come up with the miracle patch fix? Suspect the plastic melt reattachment would crack at the post pin attachment. Anyone try fiberglass patch/resin combination with success? Thanks, Todd ------------------------------------ Posted by: T ------------------------------------ List Sponsors - Dual Sport News: [url=http://www.dualsportnews.com]http://www.dualsportnews.com[/url] Arrowhead Motorsports: http://www.arrowheadmotorsports.com List FAQ courtesy of Chris Krok: [url=http://www.bigcee.com/klr650faq.html]http://www.bigcee.com/klr650faq.html[/url] Members Map https://maps.google.com/maps/ms?msid=212558560286766214899.0004d0fa9f1732283bb6f&msa=0&ll=38.522384,-109.489746&spn=6.831383,9.624023 ------------------------------------ Yahoo Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/DSN_KLR650/ Your email settings: Individual Email | Traditional To change settings online go to: http://groups.yahoo.com/group/DSN_KLR650/join (Yahoo! ID required) To change settings via email: DSN_KLR650-digest@yahoogroups.com DSN_KLR650-fullfeatured@yahoogroups.com To unsubscribe from this group, send an email to: DSN_KLR650-unsubscribe@yahoogroups.com Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/

Check out the Sugru product - you can get it several places. Good thing to keep on the bike for all sorts of issues.

On Thu, May 19, 2016 at 11:26 AM, T zootpatutie@... [DSN_KLR650] DSN_KLR650@yahoogroups.com> wrote: [u][/u] Thank you each for the resources. Appreciate the possibilities. t. On 5/19/2016 8:50 AM, Martin Earl mjearl4@... [DSN_KLR650] wrote: zoot- I have repaired some bike plastics with super glue and baking soda sprinkled over the joint. NOTE: the reaction gets really hot. There are UTube tutorials out there; watch a couple prior to trying it out. Most of the tutorials are about modelers making seamless joints...the plastic is also a different formula than KHI plastics. THIS solution: It works on some Kawasaki plastic, some it does not. I repaired a 2007 KLX250 side panel and it was holding after 3 years. I repaired a 2001 KLR650 brush guard...no so good. shrug. It held until I dropped the bike on the same brushguard, however, in only broke on the repaired seam. It all depends on the plastic formula.... revmaaatin. On Thu, May 19, 2016 at 8:56 AM, T zootpatutie@... [DSN_KLR650] DSN_KLR650@yahoogroups.comDSN_KLR650@yahoogroups.com> wrote: Did an unscheduled dismount (story posted at Fazedbook if interested), and broke the shroud corner plastic. Have any y'all come up with the miracle patch fix? Suspect the plastic melt reattachment would crack at the post pin attachment. Anyone try fiberglass patch/resin combination with success? Thanks, Todd ------------------------------------ Posted by: T ------------------------------------ List Sponsors - Dual Sport News: http://www.dualsportnews.com Arrowhead Motorsports: http://www.arrowheadmotorsports.com List FAQ courtesy of Chris Krok: http://www.bigcee.com/klr650faq.html Members Map https://maps.google.com/maps/ms?msid=212558560286766214899.0004d0fa9f1732283bb6f&msa=0&ll=38.522384,-109.489746&spn=6.831383,9.624023 ------------------------------------ Yahoo Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/DSN_KLR650/ Your email settings: Individual Email | Traditional To change settings online go to: http://groups.yahoo.com/group/DSN_KLR650/join (Yahoo! ID required) To change settings via email: DSN_KLR650-digest@yahoogroups.com DSN_KLR650-fullfeatured@yahoogroups.com To unsubscribe from this group, send an email to: DSN_KLR650-unsubscribe@yahoogroups.com Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/

Mark, I vote G/Flex epoxy for KLR repair, (I hope.)That looks like some tough stuff. Mike Frey is the plastics guy on the forum...he has previously suggested some plastics wont weld/repair with out some expensive intervention.It would be great news if this worked on KLR plastic.m.

On Thu, May 19, 2016 at 9:19 AM, Mark Van Horn kl650b2@... [DSN_KLR650] DSN_KLR650@yahoogroups.com> wrote: https://www.youtube.com/watch?v=2a5RlcP-4JE> On Thu, May 19, 2016 at 11:13 AM, Mark Van Horn wrote: If it's gen 1 plastic, I'd try West System G-flex. Mark On Thu, May 19, 2016 at 10:56 AM, T zootpatutie@... [DSN_KLR650] DSN_KLR650@yahoogroups.com> wrote: Did an unscheduled dismount (story posted at Fazedbook if interested), and broke the shroud corner plastic. Have any y'all come up with the miracle patch fix? Suspect the plastic melt reattachment would crack at the post pin attachment. Anyone try fiberglass patch/resin combination with success? Thanks, Todd ------------------------------------ Posted by: T ------------------------------------ List Sponsors - Dual Sport News: http://www.dualsportnews.com Arrowhead Motorsports: http://www.arrowheadmotorsports.com List FAQ courtesy of Chris Krok: http://www.bigcee.com/klr650faq.html Members Map https://maps.google.com/maps/ms?msid=212558560286766214899.0004d0fa9f1732283bb6f&msa=0&ll=38.522384,-109.489746&spn=6.831383,9.624023 ------------------------------------ Yahoo Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/DSN_KLR650/ Your email settings: Individual Email | Traditional To change settings online go to: http://groups.yahoo.com/group/DSN_KLR650/join (Yahoo! ID required) To change settings via email: DSN_KLR650-digest@yahoogroups.com DSN_KLR650-fullfeatured@yahoogroups.com To unsubscribe from this group, send an email to: DSN_KLR650-unsubscribe@yahoogroups.com Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/

I'm jumping in the middle of this, don't know what was discussed, but here is my experience:   I had a pinhole leak (manufacturing defect) on my IMS gas tank for my 06 KLR650.  JB weld type glue didn't work.  So I drained the tank of gas, FILLED it with water, and used a Harbor Freight plastic welding kit on it.  Worked perfect, been holding for over a year. (don't underestimate the explosive power of some fumes in a gas tank.  People have been killed that way).   The kit looks like a simple soldering iron.  I just melted the tank plastic, smeared it around, and it cooled hard and looked fine.   Jeff     -----Original Message----- From: Martin Earl mjearl4@... [DSN_KLR650] DSN_KLR650@yahoogroups.com> To: DSN KLR650 DSN_KLR650@yahoogroups.com>; Mark Van Horn Sent: Thu, May 19, 2016 10:28 am Subject: Re: [DSN_KLR650] Miracle plastic repair?   Mark,  I vote G/Flex epoxy for KLR repair, (I hope.) That looks like some tough stuff. Mike Frey is the plastics guy on the forum...he has previously suggested some plastics wont weld/repair with out some expensive intervention. It would be great news if this worked on KLR plastic. m. 

On Thu, May 19, 2016 at 9:19 AM, Mark Van Horn kl650b2@... [DSN_KLR650] DSN_KLR650@yahoogroups.com> wrote: https://www.youtube.com/watch?v=2a5RlcP-4JE> On Thu, May 19, 2016 at 11:13 AM, Mark Van Horn wrote: If it's gen 1 plastic, I'd try West System G-flex. Mark On Thu, May 19, 2016 at 10:56 AM, T zootpatutie@... [DSN_KLR650] DSN_KLR650@yahoogroups.com> wrote: Did an unscheduled dismount (story posted at Fazedbook if interested), and broke the shroud corner plastic.  Have any y'all come up with the miracle patch fix?  Suspect the plastic melt reattachment would crack at the post pin attachment.  Anyone try fiberglass patch/resin combination with success? Thanks, Todd ------------------------------------ Posted by: T ------------------------------------ List Sponsors - Dual Sport News: http://www.dualsportnews.com Arrowhead Motorsports: http://www.arrowheadmotorsports.com List FAQ courtesy of Chris Krok: http://www.bigcee.com/klr650faq.html Members Map https://maps.google.com/maps/ms?msid=212558560286766214899.0004d0fa9f1732283bb6f&msa=0&ll=38.522384,-109.489746&spn=6.831383,9.624023 ------------------------------------ Yahoo Groups Links To visit your group on the web, go to:     http://groups.yahoo.com/group/DSN_KLR650/ Your email settings:     Individual Email | Traditional To change settings online go to:     http://groups.yahoo.com/group/DSN_KLR650/join     (Yahoo! ID required) To change settings via email:     DSN_KLR650-digest@yahoogroups.com     DSN_KLR650-fullfeatured@yahoogroups.com To unsubscribe from this group, send an email to:     DSN_KLR650-unsubscribe@yahoogroups.com Your use of Yahoo Groups is subject to:     https://info.yahoo.com/legal/us/yahoo/utos/terms/

#ygrps-yiv-48382299 #ygrps-yiv-48382299AOLMsgPart_2_eb9fc77b-3e28-4b4d-9d59-2feb4456862f td{color:black;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-mkp hr {border:1px solid #d8d8d8;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-mkp #ygrps-yiv-48382299hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-mkp #ygrps-yiv-48382299ads {margin-bottom:10px;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-mkp .ygrps-yiv-48382299ad {padding:0 0;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-mkp .ygrps-yiv-48382299ad p {margin:0;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-mkp .ygrps-yiv-48382299ad a {color:#0000ff;text-decoration:none;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-sponsor #ygrps-yiv-48382299ygrp-lc {font-family:Arial;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-sponsor #ygrps-yiv-48382299ygrp-lc #ygrps-yiv-48382299hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-sponsor #ygrps-yiv-48382299ygrp-lc .ygrps-yiv-48382299ad {margin-bottom:10px;padding:0 0;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299actions {font-family:Verdana;font-size:11px;padding:10px 0;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299activity span {font-weight:700;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299activity span:first-child {text-transform:uppercase;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299activity span a {color:#5085b6;text-decoration:none;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299activity span span {color:#ff7900;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299activity span .ygrps-yiv-48382299underline {text-decoration:underline;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody .ygrps-yiv-48382299attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody .ygrps-yiv-48382299attach div a {text-decoration:none;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody .ygrps-yiv-48382299attach img {border:none;padding-right:5px;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody .ygrps-yiv-48382299attach label {display:block;margin-bottom:5px;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody .ygrps-yiv-48382299attach label a {text-decoration:none;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody blockquote {margin:0 0 0 4px;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody .ygrps-yiv-48382299bold {font-family:Arial;font-size:13px;font-weight:700;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody .ygrps-yiv-48382299bold a {text-decoration:none;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody dd.ygrps-yiv-48382299last p a {font-family:Verdana;font-weight:700;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody dd.ygrps-yiv-48382299last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody dd.ygrps-yiv-48382299last p span.ygrps-yiv-48382299yshortcuts {margin-right:0;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody div.ygrps-yiv-48382299attach-table div div a {text-decoration:none;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody div.ygrps-yiv-48382299attach-table {width:400px;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody div.ygrps-yiv-48382299file-title a, #ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody div.ygrps-yiv-48382299file-title a:active, #ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody div.ygrps-yiv-48382299file-title a:hover, #ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody div.ygrps-yiv-48382299file-title a:visited {text-decoration:none;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody div.ygrps-yiv-48382299photo-title a, #ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody div.ygrps-yiv-48382299photo-title a:active, #ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody div.ygrps-yiv-48382299photo-title a:hover, #ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody div.ygrps-yiv-48382299photo-title a:visited {text-decoration:none;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody div#ygrps-yiv-48382299ygrp-mlmsg #ygrps-yiv-48382299ygrp-msg p a span.ygrps-yiv-48382299yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody .ygrps-yiv-48382299green {color:#628c2a;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody .ygrps-yiv-48382299MsoNormal {margin:0 0 0 0;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody o {font-size:0;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299photos div {float:left;width:72px;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299photos div div {border:1px solid #666666;height:62px;overflow:hidden;width:62px;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299reco-category {font-size:77%;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299reco-desc {font-size:77%;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody .ygrps-yiv-48382299replbq {margin:4px;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-mlmsg table {font-size:inherit;font:100%;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-mlmsg select, #ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody input, #ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody textarea {font:99% Arial, Helvetica, clean, sans-serif;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-mlmsg pre, #ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody code {font:115% monospace;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-mlmsg * {line-height:1.22em;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-mlmsg #ygrps-yiv-48382299logo {padding-bottom:10px;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-msg p a {font-family:Verdana;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-msg p#ygrps-yiv-48382299attach-count span {color:#1E66AE;font-weight:700;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-reco #ygrps-yiv-48382299reco-head {color:#ff7900;font-weight:700;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-reco {margin-bottom:20px;padding:0px;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-sponsor #ygrps-yiv-48382299ov li a {font-size:130%;text-decoration:none;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-sponsor #ygrps-yiv-48382299ov li {font-size:77%;list-style-type:square;padding:6px 0;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-sponsor #ygrps-yiv-48382299ov ul {margin:0;padding:0 0 0 8px;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-text {font-family:Georgia;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-text p {margin:0 0 1em 0;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-text tt {font-size:120%;}#ygrps-yiv-48382299 .ygrps-yiv-48382299aolReplacedBody #ygrps-yiv-48382299ygrp-vital ul li:last-child {border-right:none !important;}

#ygrps-yiv-1172935180 {margin:0.7em;}#ygrps-yiv-1172935180 p {margin:0;}#ygrps-yiv-1172935180 .ygrps-yiv-1172935180OECFntDef {font-family:"Segoe UI", Tahoma, Verdana, Arial, Helvetica, sans-serif;font-size:10pt;} I own Why We Ride and have watched it more than once. Even so, it's got way to many slow-motion shots. With the reviews I've been seeing, I'll have to give this   --- New Outlook Express and Windows Live Mail replacement - get it here: http://www.oeclassic.com/   one a "pass". -eddie Original Message:

From: Randy Jackson rafter@... [DSN_KLR650] DSN_KLR650@yahoogroups.com> Reply-To: DSN_KLR650@yahoogroups.com>, To: DSN_KLR650@yahoogroups.com> Sent: 5/20/2016 12:58:05 PM Subject: [DSN_KLR650] Re: DS Adventure Movie, Dodged the Bullet      Damn, we considered the 70 mile RT, $23 for 2 tickets and dinner out. Something just kept niggling at me, am I just getting so old I don't want to spend the money or is it missing my bed time? Finally realized I just wasn't that excited after watching the trailer. Usually they put most of the good parts in the trailer, if this was the case, it did not have enough pull. So glad I listened to my niggling feeling. Saved some coin, best of all, didn't wind up pissed off last night. Randy

On 5/20/2016 8:17 AM, Mark nomad59@... [DSN_KLR650] wrote:

  DECEPTION!!! MISLEADING PROMO, LIED! IT WAS ALL ABOUT, PTSD ETC ETC, I WALKED OUT, 1/2WAY ?  SEVERAL!!!! OTHERS ON fACEBOOK SAID, IT WAS A, TURN TO CHRISTIANITY PROMOTION, THE LAST 1/2.    On Friday, May 20, 2016 10:39 AM, "John Theilgard jthouses@... [DSN_KLR650]" DSN_KLR650@yahoogroups.com wrote:   The movie had way too much talking and not enough riding. People who didn't attend really didn't miss anything. On May 20, 2016, at 1:49 AM, Ronald Cable rc.studios@... [DSN_KLR650] DSN_KLR650@yahoogroups.com> wrote:   Saw the film tonite. These guys tried hard--read as TOO hard--to combine a philosophical treatise with an off road riding story. Sorry, guys. The middle third of the film is ok, the rest is evidently what others in the theater also thought a waste of time--they got up and left. My criticisms are many, but suffice  as noted. Ronno On Thursday, May 19, 2016 3:24 PM, "Mark Van Horn kl650b2@... [DSN_KLR650]" DSN_KLR650@yahoogroups.com> wrote:   Not actually "all over the USA." Not anywhere near my Jerkwater burg anyway. On Thu, May 19, 2016 at 11:45 AM, libertyeagle@... [DSN_KLR650] DSN_KLR650@yahoogroups.com> wrote: I have read some of this guys books, he really is a good writer... and I think this film is going to be amazing. I got my Ticket A MONTH AGO... I don't go to the movies often. Even my Brother that has not been to the movies in YEARS is Going in another state and he found it independently. The theme is a Father and his sons doing an epic motorcycle trip when it starts with LEARNING TO RIDE!!! Michael