Wilsons Sandbox

Note: forwarded message attached. These are the only tires available here in Costa Rica according to the sweet girl from the Yamaha store. I want a good tire for on and off, you ever heard of Golden Boy? It is a tire brand, not a shemale. what do you think? ____________________________________________________________________________________ Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games. http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow [Non-text portions of this message have been removed]

Jacobus, Yahoo doesn't allow attachments to List posts. You'll need to cut and paste any info you want us to see, or upload it to the files folder. For the record, I haven't heard of a Golden Boy tire. __Arden --- In DSN_KLR650@yahoogroups.com, Jacobus De Bruyn wrote:

> > Note: forwarded message attached. > These are the only tires available here in Costa Rica > according to the sweet girl from the Yamaha store. > I want a good tire for on and off, you ever heard of > Golden Boy? It is a tire brand, not a shemale. > what do you think? > > > >

______________________________________________________________________ ______________

> Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's

updated for today's economy) at Yahoo! Games.

> http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow > > [Non-text portions of this message have been removed] >

this is pretty awesome you should look into this http://www.nbnews15.net/biz/?read=9649643

wow this is amazing you should look into it http://www.nbnews15.net/biz/?news=9004437

Yes out it back in.  It s a ground.   [b]From:[/b] DSN_KLR650@yahoogroups.com [b]Sent:[/b] Monday, November 17, 2014 11:20 AM [b]To:[/b] DSN_KLR650@yahoogroups.com [b]Subject:[/b] [DSN_KLR650] Fwd:     Gents, I was changing my clutch lever (2007 klr650) over the weekend and unscrewed the little rectangular piece that's right next to the choke. Two small screws hold it. It's about 1 inch long and 1/4 inch wide. Is that the grounding for the starter? A little metal part fell out (looks like a washer). Afterwards I could not start the bike. Lights are on but the starter does not click or start the bike. What rookie mistake did I make here? Does anybody know the name of that part? I need to look it up. I attached 2 pictures but not sure if you can view it. Thanks folks. -David [Non-text portions of this message have been removed]

Clutch safety switch. The little metal part is the bridge to make contact across the terminals. Can be disabled if you want, but otherwise the metal piece needs to be put back in where it slides with clutch use.  Dielectric grease will help it stay there while you button it up. t.   [b]From:[/b] fordavidz@... [DSN_KLR650] [b]Sent:[/b] Monday, November 17, 2014 10:20 AM [b]To:[/b] DSN_KLR650@yahoogroups.com [b]Subject:[/b] [DSN_KLR650] Fwd:   Gents, I was changing my clutch lever (2007 klr650) over the weekend and unscrewed the little rectangular piece that's right next to the choke. Two small screws hold it. It's about 1 inch long and 1/4 inch wide. Is that the grounding for the starter? A little metal part fell out (looks like a washer). Afterwards I could not start the bike. Lights are on but the starter does not click or start the bike. What rookie mistake did I make here? Does anybody know the name of that part? I need to look it up. I attached 2 pictures but not sure if you can view it. Thanks folks. -David [Non-text portions of this message have been removed]

On Mon, 17 Nov 2014 13:20:18 -0500 "david zawadzki fordavidz@... [DSN_KLR650]" DSN_KLR650@yahoogroups.com> writes:

> Gents, > > I was changing my clutch lever (2007 klr650) over the weekend and > unscrewed > the little rectangular piece that's right next to the choke. Two > small > screws hold it. It's about 1 inch long and 1/4 inch wide. Is that > the > grounding for the starter? A little metal part fell out (looks like > a > washer). Afterwards I could not start the bike. Lights are on but > the > starter does not click or start the bike. > > What rookie mistake did I make here? Does anybody know the name of > that > part? I need to look it up. > > I attached 2 pictures but not sure if you can view it. > > Thanks folks. > > -David

<><><><><><><><> <><><><><><><><> David, That is the clutch safety switch. It keeps the starter motor from working when the clutch is engage (lever out) and the transmission is in gear. It provides a path to ground for the starter relay (blue/red wire) when the clutch is engage (lever out) and the transmission is in neutral via the neutral switch (green wire) and also when the clutch is disengage (lever in) via the black/yellow ground wire. If you can find the part(s) and figure out how to install them the adjustment is loosen the two screws and slide the switch one way or the other then tighten the screws. Check the start motor operation with the clutch lever in and out, transmission in gear and in neutral. If it isn't working correctly or well slide it a bit more one way or the other until it does work correctly. If you want to by-pass it you connect the black/yellow wire to the blue/red wire. This will allow the starter motor to turn when the key is on and the starter button is pressed. It won't matter if the transmission is in gear or not nor will the clutch situation matter. If you can't remember to pull the clutch lever in every time you press the starter button it might not be a good idea to by-pass it. Best, Jeff Saline The Beautiful Black Hills of South Dakota 75 R90/6, 03 KLR650 . . . . . ____________________________________________________________ Odd Trick Fights Diabetes "Unique" Proven Method To Control Blood Sugar In 3 Weeks. Watch Video. http://thirdpartyoffers.juno.com/TGL3141/546a500750273500753east03vuc

Gentleman, Thank you for your input. I will put the damn thing back together. Is it just the metal plate? Or is there a tiny little switch that goes inside the plastic housing as well? I found something on the street right by the bike as i was finishing up my work and saved it. I'm guessing it needs to go back in there somehow. If anybody has any pictures of how its supposed to look please email me. I'm guessing the little switch just goes in there somehow and the plate goes between the handlebar and the plastic housing? I can't find any pics online. Anyways what's the worst that can happen? I'll get a short and burn the computer? Been there and done that. The bike was stolen from me and found. I love this baby!!!! -David

On Mon, Nov 17, 2014 at 4:10 PM, 'Norm Keller' normkel32@... [DSN_KLR650] DSN_KLR650@yahoogroups.com> wrote: [u][/u] Ditto on sticking it back. The KLR clutch switch is an optional keeper, IMO. They are pretty reliable so are generally worth keeping. If it were a Suzuki one, like a DR650, unplug the leads under the headlight and plug the two harness (male and female) bullet connectors together. No clutch switch but those crappy Suzie switches will leave you walking, IME. Might be a good time to look at the wiring diagram and plug pin outs I linked so you understand the circuit in the clutch switch. Might help if you have one fail in the bush.

-- David Z mobile: 646-267-1109 www.thelegendofzarko.com