craigslist find of the day
-
- Posts: 15
- Joined: Wed Feb 08, 2012 7:00 pm
will a 16 tooth sprocket fit with a standard length chain (106)?
Listers, I am sure this question has been asked and answered many times before, but I couldn't get the search feature to work.
Is the standard length chain (106 links) long enough to accommodate a 16 tooth front sprocket with the standard rear sprocket (43 teeth) on my 2006 KLR 650?
Thanks for your input and patience.
Jim
-
- Posts: 95
- Joined: Tue Dec 25, 2012 9:26 am
craigslist find of the day
So that's, what, a 1988, 2004, 2005, or a 2006? Even if it's a 2006, with 322 miles, that's 40 miles per year. Who buys a bike and only puts 322 miles on it in 8 years? You'd think they'd come to the realization much sooner that they don't want to ride it, and sell it after a year or two, not nearly a decade.RyanPhoenix[i]
[/i]
"zoot zootpatutie@... [DSN_KLR650]" DSN_KLR650@yahoogroups.com> wrote:
60+ K miles on Selah, and the impression was that I needed to start
looking for her successor. Goal was a black 2007 KLR with under 5K
miles. OK, sometimes you have to give a little on your demands.
Settled for red, soon to be pink, but priced for a song and with only
322 miles on her, ooooohhh, that'll do. Brought her home, named her
Purr, and now start the farkle shopping and transfer. Still has the
front forks in shipping mode and the 500 mile break in to complete.
Can't believe it.
-
- Posts: 95
- Joined: Tue Dec 25, 2012 9:26 am
will a 16 tooth sprocket fit with a standard length chain (106)?
I'm 98% sure that I didn't do anything to my chain when I put on my 16t sprocket. That last 2 percent uncertainty is because I swapped sprockets on my CRF450X around the same time, and did do chain work, which is blurring my memory.RyanPhoenix
"jim witler jims1800@... [DSN_KLR650]" DSN_KLR650@yahoogroups.com> wrote:
Listers, I am sure this question has been asked and answered many times before, but I couldn't get the search feature to work. Is the standard length chain (106 links) long enough to accommodate a 16 tooth front sprocket with the standard rear sprocket (43 teeth) on my 2006 KLR 650? Thanks for your input and patience. Jim
Who is online
Users browsing this forum: No registered users and 31 guests