Page 1 of 1
fs 2008 shock
Posted: Thu Sep 25, 2014 5:00 am
by libertyeagle
I have decided to sell my shock off of my 2008, was in good working condition when I took it off... Asking $135 or best offer and I can ship to lower 48 states, or you can pick up in Northern California. Or will consider a trade for a quality center stand for the Gen 2 KLR, will need all hardware.
Michael
fs 2008 shock
Posted: Fri Sep 26, 2014 6:46 am
by achesley43@ymail.com
Picked an '08 shock up off Ebay a couple years ago. Bolts right on the 1st Gen KLR for those not knowing.
fs 2008 shock
Posted: Fri Sep 26, 2014 7:13 am
by Fred Hink
The shock length and upper mounting bolt are the same for both early and late KLRs but the lower mounting bolt is different. The lower clevis is thinner on the late model and takes a shorter mounting bolt. You can use a early model bolt with a late shock but not the other way around. You will need to install a couple of washers under the head of the longer bolt for it to work on the late model shock.
Fred
http://www.arrowheadmotorsports.com
[b]From:[/b]
DSN_KLR650@yahoogroups.com [b]Sent:[/b] Friday, September 26, 2014 5:46 AM [b]To:[/b]
DSN_KLR650@yahoogroups.com [b]Subject:[/b] [DSN_KLR650] Re: FS 2008 Shock
Picked an '08 shock up off Ebay a couple years ago. Bolts right on the 1st Gen KLR for those not knowing.
fs 2008 shock
Posted: Sun Sep 28, 2014 3:48 am
by achesley43@ymail.com
LOL Fred,
You made me have to go out and look at my shock. Yes, forgot I had put in shiming washers. Fixing to take it all apart next week for maintenance on all that stuff that moves down there. Plus other issues.
fs 2008 shock
Posted: Sun Sep 28, 2014 8:33 am
by David Bowden
It got to be one harsh ride without a shock. You MUST be hard up.
On Sep 25, 2014 3:00 AM, "libertyeagle@... [DSN_KLR650]" DSN_KLR650@yahoogroups.com> wrote:
[u][/u]
I have decided to sell my shock off of my 2008, was in good working condition when I took it off... Asking $135 or best offer and I can ship to lower 48 states, or you can pick up in Northern California. Or will consider a trade for a quality center stand for the Gen 2 KLR, will need all hardware.
Michael
wiring identification gen2
Posted: Sun Sep 28, 2014 5:54 pm
by Norm Keller
#ygrps-yiv-101663964 blockquote.ygrps-yiv-101663964cite {margin-left:5px;margin-right:0px;padding-left:10px;padding-right:0px;border-left:1px solid #cccccc;} #ygrps-yiv-101663964 blockquote.ygrps-yiv-101663964cite2 {margin-left:5px;margin-right:0px;padding-left:10px;padding-right:0px;border-left:1px solid #cccccc;margin-top:3px;padding-top:0px;} #ygrps-yiv-101663964 .ygrps-yiv-101663964plain pre, #ygrps-yiv-101663964 .ygrps-yiv-101663964plain tt {font-family:monospace;font-size:100%;font-weight:normal;font-style:normal;} #ygrps-yiv-101663964 {font-family:Tahoma;font-size:12pt;} #ygrps-yiv-101663964 .ygrps-yiv-101663964plain pre, #ygrps-yiv-101663964 .ygrps-yiv-101663964plain tt {font-family:Tahoma;font-size:12pt;} The Gen1 wiring project is nearing completion and having been asked about Gen2, I'm wondering if someone might help out with some photos of a Gen2 harness off the bike? Location photos showing any and all of the wiring plugs locations [u]on the bike[/u] would also be helpful. I will have to wait until a Gen2 bike is here with some time to spend but will gather more information at that time. It's coming into not-riding time for some folks so hoping we can obtain some of the photos. Anyone able to help? No electrical knowledge is necessary, just willingness to look and take some photos.
fs 2008 shock
Posted: Mon Sep 29, 2014 1:19 pm
by libertyeagle
Just to let everyone know they shock sold... another thank you to Fred for the group
Michael
fs 2008 shock
Posted: Tue Sep 30, 2014 7:24 am
by skypilot110
Thats right. I have a shock for loaded travel and a shock for unloaded playing. Now if I could just find a 2008+ rear wheel
---In
DSN_KLR650@yahoogroups.com, wrote :
Just to let everyone know they shock sold... another thank you to Fred for the group
Michael
fs 2008 shock
Posted: Tue Sep 30, 2014 10:57 am
by Fred Hink
I have one without the sprocket or sprocket carrier. If you are interested, you can contact me off list. Fred
http://www.arrowheadmotorsports.com
[b]From:[/b]
DSN_KLR650@yahoogroups.com [b]Sent:[/b] Tuesday, September 30, 2014 6:24 AM [b]To:[/b]
DSN_KLR650@yahoogroups.com [b]Subject:[/b] Re: [DSN_KLR650] FS 2008 Shock
Thats right. I have a shock for loaded travel and a shock for unloaded playing. Now if I could just find a 2008+ rear wheel
---In DSN_KLR650@yahoogroups.com, wrote :
Just to let everyone know they shock sold... another thank you to Fred for the group
Michael