fans

[GMac999]

Do the added blades cool better? Low speed single track mine can barely keep up with the temp.

 

GregM

 

[b]From:[/b] DSN_KLR650@yahoogroups.com [mailto:DSN_KLR650@yahoogroups.com] [b]Sent:[/b] Wednesday, June 18, 2014 8:29 AM [b]To:[/b] DSN_KLR650@yahoogroups.com [b]Subject:[/b] [DSN_KLR650] Re: fans

 

The Ninja EX500 fan is a two wire fan, vs the KLR 3-wire fan. "I believe" the KLR third wire is an additional, more-positive ground, directly from the motor to frame. I don't have the experience, but "I believe" it will work just fine without it. (I bought the fan assembly for the fan blade--and now have a spare motor.)   You will see that the ninja fan is 8 blade vs the KLR 6-bladeed fan. . The bolt and radius of the fan are =, so it bolts right in. It will give you a smiley face all over again. I think the OEM price for the entire KLR assembly is $385, so $26 is looking pretty good!

Varience between years has not been validated.

http://motors.shop.ebay.com/__?_from=R40&_trksid=m39&_nkw=ninja+ex500+fan

 

####### Fan and Starter Circuit Relay 

Varience between years has not been validated but known to work on pre 08s

As submitted by Jeff Saline follows

I haven't verified the info but believe it to be correct.

Relay is under the tank. replacement part is available from Auto Zone, Advance, etc.

 

Fan relay info from

http://www.advrider.com/forums/showthread.php?t=451043

 

Manufacturer - GP Sorenson

Number on Box - 41-5002

Other Part Number - R3054Z - use if kid at counter can't find the first #.

--------- Forwarded message ----------

Date: Sun, 17 Sep 2006 

after having 2 kawasaki fan relays fail on the trail, i now carry a spare. toyota part #90987-02004-83 is identical to the stock part and costs $12.84.