Wilsons Sandbox

On 4/12/2014 3:00 PM, david greenberg wrote:

On Mon, Apr 14, 2014 at 2:25 PM, RobertWichert wrote: [u][/u] I did not remove the front plastic when I changed mine. I don't know exactly how I did it. Probably brute force and bleeding hands. But it got changed. Robert Wichert P.Eng. LEED AP BD&C +1 916 966 9060 FAX +1 916 966 9068 =============================================== On 4/12/2014 3:00 PM, david greenberg wrote: The Clymers says I should remove most of the plastic to get at the low beam bulb. Is there any reason why I shouldn't just snake my hand up in there to pull the bulb? I can reach it. I suppose you just remove the rubber cap, either undo a clip or twist out the bulb.... David L. Greenberg RE/Max HomeStores Bisbee, AZ www.azlandman.com Do, or Do Not, There is no Try - Yoda

On Mon, Apr 14, 2014 at 2:27 PM, david zawadzki wrote: On Mon, Apr 14, 2014 at 2:25 PM, RobertWichert wrote: [u][/u] I did not remove the front plastic when I changed mine. I don't know exactly how I did it. Probably brute force and bleeding hands. But it got changed. Robert Wichert P.Eng. LEED AP BD&C +1 916 966 9060 FAX +1 916 966 9068 =============================================== On 4/12/2014 3:00 PM, david greenberg wrote: The Clymers says I should remove most of the plastic to get at the low beam bulb. Is there any reason why I shouldn't just snake my hand up in there to pull the bulb? I can reach it. I suppose you just remove the rubber cap, either undo a clip or twist out the bulb.... David L. Greenberg RE/Max HomeStores Bisbee, AZ www.azlandman.com Do, or Do Not, There is no Try - Yoda

[b]From:[/b] david zawadzki [b]To:[/b] RobertWichert [b]Cc:[/b] david greenberg ; KLR Group dsn_klr650@yahoogroups.com> [b]Sent:[/b] Monday, April 14, 2014 2:36 PM [b]Subject:[/b] Re: [DSN_KLR650] headlamp bulb replacement   Gen 1 or 2?  My Gen 1 bike had this annoying metal clam around it that was a pain to take off and impossible to put back on. For me at least.... -David On Mon, Apr 14, 2014 at 2:27 PM, david zawadzki wrote: On Mon, Apr 14, 2014 at 2:25 PM, RobertWichert wrote: [u][/u]   I did not remove the front plastic when I changed mine.  I don't know exactly how I did it.  Probably brute force and bleeding hands.  But it got changed. Robert Wichert P.Eng. LEED AP BD&C +1 916 966 9060 FAX +1 916 966 9068 =============================================== On 4/12/2014 3:00 PM, david greenberg wrote:   The Clymers says I should remove most of the plastic to get at the low beam bulb. Is there any reason why I shouldn't just snake my hand up in there to pull the bulb? I can reach it. I suppose you just remove the rubber cap, either undo a clip or twist out the bulb.... David L. Greenberg RE/Max HomeStores Bisbee, AZ http://www.azlandman.com/ Do, or Do Not, There is no Try - Yoda

On Mon, Apr 14, 2014 at 2:27 PM, david zawadzki wrote: On Mon, Apr 14, 2014 at 2:25 PM, RobertWichert wrote: [u][/u]   I did not remove the front plastic when I changed mine.  I don't know exactly how I did it.  Probably brute force and bleeding hands.  But it got changed. Robert Wichert P.Eng. LEED AP BD&C +1 916 966 9060 FAX +1 916 966 9068 =============================================== On 4/12/2014 3:00 PM, david greenberg wrote:   The Clymers says I should remove most of the plastic to get at the low beam bulb. Is there any reason why I shouldn't just snake my hand up in there to pull the bulb? I can reach it. I suppose you just remove the rubber cap, either undo a clip or twist out the bulb.... David L. Greenberg RE/Max HomeStores Bisbee, AZ http://www.azlandman.com/ Do, or Do Not, There is no Try - Yoda