oil changes nklr
Posted: Mon Nov 25, 2013 3:09 pm
An added benefit: If you want to challenge some cad to a duel, during or after the oil change, you can take off your nitrile glove and slap the low-life in the face. The oily smudge on his face will only reinforce your point.
Bogdan
From: Ron Haraseth
Date: Monday, November 25, 2013 1:59 PM
To: "DSN_KLR650@yahoogroups.com" DSN_KLR650@yahoogroups.com>
Subject: Re: [DSN_KLR650] oil changes
That s the way I do it, but find it works even better when I'm wearing the nitrile gloves
From: Jeff Khoury
Sent: Monday, November 25, 2013 1:55 PM
To: eddie
Cc: KLR650 list
Subject: Re: [DSN_KLR650] oil changes
How I remove the oil plug (when warm):
1. Break it loose with a ratchet.
2. Place the middle finger of my left hand in the center of the bolt head
3. Loosen the bolt with my right hand, keeping light pressure straight on the bolt head with my left.
4. When you feel that you've completely unscrewed the bolt (you'll feel the thread "click"), simply tilt and pull the bolt out; you won't get a drop on you.
-Jeff Khoury
[Non-text portions of this message have been removed]