Wilsons Sandbox

Posted: **Tue Aug 27, 2013 4:49 pm**

SeaFoam is a mix of isopropanol, hydraulic fluid and Coleman white gas. I don't think it will lift paint... unless left there for a loooooong time. Mark

> >

At 2:38 PM -0700 8/27/13, mark ward wrote:

>I have an 07, I noticed that near the tank neck >and down the tank a bit, a strip (.5 x 1 >inch) bubbled up, like when you put paint >stripper on something painted. > >I guesting I most have splashed a little sea >foam on it, because I can't think what else it >may have been?

Posted: **Tue Aug 27, 2013 6:27 pm**

Hi all, Q 1 - Just installed 1" lowering links on 02 KLR. Does chain adjustment need to be changed? Thought is, no. Tight spot which we adjust for is still the same. Q 2 - What chemical is good to remove powder coat paint. Need to weld a crack in a Happy Trails engine guard that runs along the original weld. Any thoughts on preventing a crack along the side of the new weld? Best to all! Regards, Don M Atlanta, GA

Wilsons Sandbox

sea foam?

sea foam?

chain adjustment with lowering links and powder coat removal