damper rod tool - 2008 klr
Posted: Wed Jun 19, 2013 8:36 am
Yup... I just use an impact gun and hold the fork
in upside-down my hands, letting Mr. Gravity pull
down on the fork upper. I've never had one that
didn't come apart after 2 or 3 zaps..
Mark
At 6:59 AM -0600 6/19/13, Fred Hink wrote:
>...Zapping it once or twice with an air impact >gun with pressure you put on the damper rod from >pulling the forks apart will keep it from >spinning and break loose this bolt. Not sure >this would work if you are turning this bolt >with a ratchet but it may. It ll take a few > impacts to break loose the bolt.