Page 1 of 3

new mikuni performace carburetor for the klr650

Posted: Mon Apr 01, 2013 1:12 am
by Fred Hink
New testing and dyno runs have proven incredible results of the New Mikuni Performance Carburetor mounted on the KLR650. This carburetor is now a complete kit ready to bolt on any stock or modified KLR to offer increase throttle response, better tune-ability and blinding speeds. Check out the amazing results and the special Group-Buy offer here: http://www.angelfire.com/ut/moab/vm38.html Fred http://www.arrowheadmotorsports.com [Non-text portions of this message have been removed]

new mikuni performace carburetor for the klr650

Posted: Mon Apr 01, 2013 6:31 am
by AR Cooper
Too bad this isn't March. Al Cooper Medina, Ohio
On 4/1/2013 2:12 AM, Fred Hink wrote: > > New testing and dyno runs have proven incredible results of the New > Mikuni Performance Carburetor mounted on the KLR650. This carburetor > is now a complete kit ready to bolt on any stock or modified KLR to > offer increase throttle response, better tune-ability and blinding speeds. > > Check out the amazing results and the special Group-Buy offer here: > http://www.angelfire.com/ut/moab/vm38.html > > Fred > http://www.arrowheadmotorsports.com > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed]

new mikuni performace carburetor for the klr650

Posted: Mon Apr 01, 2013 7:18 am
by Mike Huber
Will it adapt to the HyperCharger !!!!! It should smoke your Vette then !!!! Mike Huber Carlsbad NM To: moabmc@... CC: DSN_klr650@yahoogroups.com From: arcooper@... Date: Mon, 1 Apr 2013 07:31:50 -0400 Subject: Re: [DSN_KLR650] New Mikuni Performace Carburetor for the KLR650 Too bad this isn't March. Al Cooper Medina, Ohio
On 4/1/2013 2:12 AM, Fred Hink wrote: > > New testing and dyno runs have proven incredible results of the New > Mikuni Performance Carburetor mounted on the KLR650. This carburetor > is now a complete kit ready to bolt on any stock or modified KLR to > offer increase throttle response, better tune-ability and blinding speeds. > > Check out the amazing results and the special Group-Buy offer here: > http://www.angelfire.com/ut/moab/vm38.html > > Fred > http://www.arrowheadmotorsports.com > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]

new mikuni performace carburetor for the klr650

Posted: Mon Apr 01, 2013 7:23 am
by Fred Hink
This carb for the KLR is real, but some of the advertising may have been enhanced a little. Not that most manufacturers don t already do this to some degree. (wink wink, nudge nudge) Fred http://www.arrowheadmotorsports.com From: AR Cooper Sent: Monday, April 1, 2013 5:31 AM To: Fred Hink Cc: KLR List Subject: Re: [DSN_KLR650] New Mikuni Performace Carburetor for the KLR650 Too bad this isn't March. Al Cooper Medina, OhioOn 4/1/2013 2:12 AM, Fred Hink wrote: New testing and dyno runs have proven incredible results of the New Mikuni Performance Carburetor mounted on the KLR650. This carburetor is now a complete kit ready to bolt on any stock or modified KLR to offer increase throttle response, better tune-ability and blinding speeds. Check out the amazing results and the special Group-Buy offer here: http://www.angelfire.com/ut/moab/vm38.html Fred http://www.arrowheadmotorsports.com [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]

new mikuni performace carburetor for the klr650

Posted: Mon Apr 01, 2013 7:29 am
by Fred Hink
Oh yes! This Mikuni Carburetor conversion is Hipercharger compatible. The jets included with this kit are for gasoline only but if you are using NOS we can work up the correct jetting for your application. Thanks for bringing up this important selling point. Fred http://www.arrowheadmotorsports.com From: Mike Huber Sent: Monday, April 1, 2013 6:18 AM To: AR Cooper ; Fred Hink Cc: dsn_klr650@yahoogroups.com Subject: RE: [DSN_KLR650] New Mikuni Performace Carburetor for the KLR650 Will it adapt to the HyperCharger !!!!! It should smoke your Vette then !!!! Mike Huber Carlsbad NM -------------------------------------------------------------------------------- To: moabmc@... CC: DSN_klr650@yahoogroups.com From: arcooper@... Date: Mon, 1 Apr 2013 07:31:50 -0400 Subject: Re: [DSN_KLR650] New Mikuni Performace Carburetor for the KLR650 Too bad this isn't March. Al Cooper Medina, Ohio
On 4/1/2013 2:12 AM, Fred Hink wrote: > > New testing and dyno runs have proven incredible results of the New > Mikuni Performance Carburetor mounted on the KLR650. This carburetor > is now a complete kit ready to bolt on any stock or modified KLR to > offer increase throttle response, better tune-ability and blinding speeds. > > Check out the amazing results and the special Group-Buy offer here: > http://www.angelfire.com/ut/moab/vm38.html > > Fred > http://www.arrowheadmotorsports.com > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]

new mikuni performace carburetor for the klr650

Posted: Mon Apr 01, 2013 8:47 am
by RobertWichert
OK, Fred... I looks like there is more than one April Fools joke on that presentation. Did you photoshop the gauges? Robert Wichert P.Eng. LEED AP BD&C +1 916 966 9060 FAX +1 916 966 9068 ===============================================
On 3/31/2013 11:12 PM, Fred Hink wrote: > > New testing and dyno runs have proven incredible results of the New > Mikuni Performance Carburetor mounted on the KLR650. This carburetor > is now a complete kit ready to bolt on any stock or modified KLR to > offer increase throttle response, better tune-ability and blinding speeds. > > Check out the amazing results and the special Group-Buy offer here: > http://www.angelfire.com/ut/moab/vm38.html > > Fred > http://www.arrowheadmotorsports.com > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed]

new mikuni performace carburetor for the klr650

Posted: Mon Apr 01, 2013 9:01 am
by Fred Hink
The KLR Mikuni carb is real and they are setting on my counter as we speak. I only reported the facts. You can t always believe Dyno results as sometimes they may be inaccurate and reflect an optimistic view. No Photoshop here. Just ask Rev. Chuck. Fred http://www.arrowheadmotorsports.com From: RobertWichert Sent: Monday, April 1, 2013 7:47 AM To: Fred Hink Cc: KLR List Subject: Re: [DSN_KLR650] New Mikuni Performace Carburetor for the KLR650 OK, Fred... I looks like there is more than one April Fools joke on that presentation. Did you photoshop the gauges? Robert Wichert P.Eng. LEED AP BD&C +1 916 966 9060 FAX +1 916 966 9068 ===============================================
On 3/31/2013 11:12 PM, Fred Hink wrote: New testing and dyno runs have proven incredible results of the New Mikuni Performance Carburetor mounted on the KLR650. This carburetor is now a complete kit ready to bolt on any stock or modified KLR to offer increase throttle response, better tune-ability and blinding speeds. Check out the amazing results and the special Group-Buy offer here: http://www.angelfire.com/ut/moab/vm38.html Fred http://www.arrowheadmotorsports.com [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]

new mikuni performace carburetor for the klr650

Posted: Mon Apr 01, 2013 9:10 am
by RobertWichert
Yes, and when the torque and HP scales are identical, that only means they are more accurate, right? Robert Wichert P.Eng. LEED AP BD&C +1 916 966 9060 FAX +1 916 966 9068 ===============================================
On 4/1/2013 7:01 AM, Fred Hink wrote: > The KLR Mikuni carb is real and they are setting on my counter as we > speak. I only reported the facts. You can t always believe Dyno > results as sometimes they may be inaccurate and reflect an optimistic > view. No Photoshop here. Just ask Rev. Chuck. > > Fred > http://www.arrowheadmotorsports.com > > *From:* RobertWichert > *Sent:* Monday, April 1, 2013 7:47 AM > *To:* Fred Hink > *Cc:* KLR List DSN_klr650@yahoogroups.com> > *Subject:* Re: [DSN_KLR650] New Mikuni Performace Carburetor for the > KLR650 > OK, Fred... > > I looks like there is more than one April Fools joke on that presentation. > > Did you photoshop the gauges? > > > Robert Wichert P.Eng. LEED AP BD&C > +1 916 966 9060 > FAX +1 916 966 9068 > > > > > > > > =============================================== > On 3/31/2013 11:12 PM, Fred Hink wrote: >> >> New testing and dyno runs have proven incredible results of the New >> Mikuni Performance Carburetor mounted on the KLR650. This carburetor >> is now a complete kit ready to bolt on any stock or modified KLR to >> offer increase throttle response, better tune-ability and blinding >> speeds. >> >> Check out the amazing results and the special Group-Buy offer here: >> http://www.angelfire.com/ut/moab/vm38.html >> >> Fred >> http://www.arrowheadmotorsports.com >> >> [Non-text portions of this message have been removed] >> >> > [Non-text portions of this message have been removed]

new mikuni performace carburetor for the klr650

Posted: Mon Apr 01, 2013 9:18 am
by Fred Hink
I suppose but I m no dyno expert. I pays my money and get the results I paid for. I suppose if I had paid more to the dyno operator I might have even better (higher) results. Dyno results can be easily manipulated, kind of like the internet. Fred http://www.arrowheadmotorsports.com From: RobertWichert Sent: Monday, April 1, 2013 8:10 AM To: Fred Hink Cc: KLR List Subject: Re: [DSN_KLR650] New Mikuni Performace Carburetor for the KLR650 Yes, and when the torque and HP scales are identical, that only means they are more accurate, right? Robert Wichert P.Eng. LEED AP BD&C +1 916 966 9060 FAX +1 916 966 9068 ===============================================
On 4/1/2013 7:01 AM, Fred Hink wrote: The KLR Mikuni carb is real and they are setting on my counter as we speak. I only reported the facts. You can t always believe Dyno results as sometimes they may be inaccurate and reflect an optimistic view. No Photoshop here. Just ask Rev. Chuck. Fred http://www.arrowheadmotorsports.com From: RobertWichert Sent: Monday, April 1, 2013 7:47 AM To: Fred Hink Cc: KLR List Subject: Re: [DSN_KLR650] New Mikuni Performace Carburetor for the KLR650 OK, Fred... I looks like there is more than one April Fools joke on that presentation. Did you photoshop the gauges? Robert Wichert P.Eng. LEED AP BD&C +1 916 966 9060 FAX +1 916 966 9068 =============================================== On 3/31/2013 11:12 PM, Fred Hink wrote: New testing and dyno runs have proven incredible results of the New Mikuni Performance Carburetor mounted on the KLR650. This carburetor is now a complete kit ready to bolt on any stock or modified KLR to offer increase throttle response, better tune-ability and blinding speeds. Check out the amazing results and the special Group-Buy offer here: http://www.angelfire.com/ut/moab/vm38.html Fred http://www.arrowheadmotorsports.com [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]

new mikuni performace carburetor for the klr650

Posted: Mon Apr 01, 2013 9:29 am
by RobertWichert
Yes, that's for sure! Robert Wichert P.Eng. LEED AP BD&C +1 916 966 9060 FAX +1 916 966 9068 ===============================================
On 4/1/2013 7:18 AM, Fred Hink wrote: > > I suppose but I m no dyno expert. I pays my money and get the results > I paid for. I suppose if I had paid more to the dyno operator I might > have even better (higher) results. Dyno results can be easily > manipulated, kind of like the internet. > > Fred > http://www.arrowheadmotorsports.com > > From: RobertWichert > Sent: Monday, April 1, 2013 8:10 AM > To: Fred Hink > Cc: KLR List > Subject: Re: [DSN_KLR650] New Mikuni Performace Carburetor for the KLR650 > > Yes, and when the torque and HP scales are identical, that only means > they are more accurate, right? > > Robert Wichert P.Eng. LEED AP BD&C > +1 916 966 9060 > FAX +1 916 966 9068 > > =============================================== > On 4/1/2013 7:01 AM, Fred Hink wrote: > > The KLR Mikuni carb is real and they are setting on my counter as we > speak. I only reported the facts. You can t always believe Dyno > results as sometimes they may be inaccurate and reflect an optimistic > view. No Photoshop here. Just ask Rev. Chuck. > > Fred > http://www.arrowheadmotorsports.com > > From: RobertWichert > Sent: Monday, April 1, 2013 7:47 AM > To: Fred Hink > Cc: KLR List > Subject: Re: [DSN_KLR650] New Mikuni Performace Carburetor for the KLR650 > > OK, Fred... > > I looks like there is more than one April Fools joke on that presentation. > > Did you photoshop the gauges? > > Robert Wichert P.Eng. LEED AP BD&C > +1 916 966 9060 > FAX +1 916 966 9068 > > =============================================== > On 3/31/2013 11:12 PM, Fred Hink wrote: > > New testing and dyno runs have proven incredible results of the New > Mikuni Performance Carburetor mounted on the KLR650. This carburetor > is now a complete kit ready to bolt on any stock or modified KLR to > offer increase throttle response, better tune-ability and blinding speeds. > > Check out the amazing results and the special Group-Buy offer here: > http://www.angelfire.com/ut/moab/vm38.html > > Fred > http://www.arrowheadmotorsports.com > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed]