Wilsons Sandbox

Posted: **Tue Aug 14, 2012 3:17 pm**

My KLR was lowered by the PO. I would like to bring it back to stock height. If you have a stock length kickstand for sale let me know please. Crash

Posted: **Wed Aug 15, 2012 9:26 am**

Sorry, Joe, I can't figure out the problem you are having. Is it stuck? If it is stuck, you will need to disconnect it at both ends. You need to figure out if the lever is stuck, the cable itself is stuck or the carb linkage is stuck. I'm pretty sure about this, but others will also give advice too. Robert Wichert P.Eng. LEED AP BD&C +1 916 966 9060 FAX +1 916 966 9068 ===============================================

On 8/14/2012 4:53 PM, jtittiger wrote: > > Hey all... keeping it compact.... > > Tore it all down and the cable to the carb (though not disconnected at > that end) seems to be OK. > > Do not have a garage. Do not have a manual. (and I can not afford one) > > Would appreciate pointing me in the right direction. > > Thanks in advance > Joe in Seymour MO > > [Non-text portions of this message have been removed]

Wilsons Sandbox

stuck choke cable

looking for a stock kick stand

stuck choke cable