Wilsons Sandbox

> Date: Sat, 18 Oct 2003 19:43:02 -0500 > From: "Matthew Durtsche" >Subject: Radiator fluid > >Just wondering if there were any recommendations on what kind of >radiator fluid I can use. Thanks in advance >Matt

> How oftern should it be replaced on an 08. Also what spec fluid do I > need to replace it with? My local Kawi shop went bust a few years > back so local procurment from a big box or auto parts store would be > groovy.

--- In DSN_KLR650@yahoogroups.com, "Jud" wrote: > > You can count me among the fans of Knipex pliers; I have a couple, a little one and a bigger one. The magnetic tool pickup is in there, as well as the Channel Lock 6" adjustable wrench with jaws that open to 42 mm. For motorbike use, I prefer 1/4" drive sockets, which cover most sizes on a bike, and are relatively light and compact. Then the only sockets I have to carry in 3/8 are the 17 and 19 mm. In most cases, you can put a combination wrench on those nuts anyway. > > I also like the Doc Allen VersaTool: > http://docallensversatool.com/ > It eliminates a lot of screwdrivers. Start with one of these and a BMW auto tool kit (They used to ride in a case on the underside of the trunk lid, and usually get junked with the car) and you won't need to add too much to flesh out a serviceable kit. > > The Motion Pro MP Tool is another handy item, a well-made kit that packs a lot of tools into a compact package. > http://motionpro.com/motorcycle/partno/08-0161/ > The price has gone up quite a bit, so you might have to swallow hard before biting, but it is probably worth it. > > Here is a site that offers tool kits for dirt bike riders. You might find that something there makes the basis for a good comprehensive set. > http://www.trailtoolz.com/Our_Products.html > > --- In DSN_KLR650@yahoogroups.com, "revmaaatin" wrote: > > > > +1 buying on sale, > > except > > when you gotta have it today, as in, > > "Oh, no, where are my tools. I loaned my tool-roll to my neighbor the day before we started on this 3-week Great Divide Ride" (Chuck, circa Sept 2008) > > "He said he would put my tool roll back in the bike...." > > That is why they make Sears! and credit cards. > > > > Several people (long term list personalites) like this pair of pliers (or it may be the larger set) > > Knipex 8603180 7-Inch Pliers Wrench > > http://www.amazon.com/Knipex-8603180-7-Inch-Pliers-Wrench/dp/B000X4KP1C/ref=sr_1_47?s=hi&ie=UTF8&qid=1342453018&sr=1-47&keywords=pliers > > > > shrug. > > those that have the pliers, seem to love them; > > I never drank that koolaid. grin. > > > > one, last, last, last thing to add to the tool discussion-- > > IMO 6pt sockets are superior to 12pt sockets for most applications. > > Lifetime warrenty tools are always better than slightly cheaper tools. > > > > Tools that you need, > > that are still on the bench/garage > > are worthless. > > > > and > > > > The only time you have to much gas, > > is when you are on fire. > > > > revmaaatin. > > > > > > --- In DSN_KLR650@yahoogroups.com, Jeff Khoury wrote: > > > > > > I probably spent about that much on mine but I bought mine in small sets when they were on sale. > > > > > > I would do things like buy a set of metric sockets, then add a couple here and there to fill in. For instance, almost no socket sets come with an 8mm 3/8" drive socket. I wanted it in 3/8" drive just so I didn't have to carry another ratchet and set of extensions. I chose my brands from places where you can buy individuals as well to round it out. > > > > > > I recommend going "medium-quality". No need to go Snap-On, Mac, etc. but get good stuff. Look at Craftsman, Kobalt, Powerbuilt, etc. All of these brands sell separates. Frequently the places that carry these will have sales and you can pick up good stuff and save dough at the same time. > > > > > > One thing I must recommend is the Powerbuilt Extendable Ratchet. It has three lengths: stubby, standard and long. The handle is comfortable and it has held up to quite a bit of abuse. It can be disassembled to be cleaned and lubed which is a requirement of mine. I also like that it collapses down so it fits well in my tool kit. I carry a 3/8" to 1/2" adaptor so I can extend the ratchet all the way out and use the 27mm on the rear axle and the 30mm for the EM countershaft nut. They also have one that's 3/8" on one side and 1/4" on the other. > > > > > > http://www.amazon.com/Powerbuilt-940485-Extendable-Ratchet-Handle/dp/B004KEIGNK > > > > > > http://www.amazon.com/gp/product/B004QO9KK2/ref=pd_lpo_k2_dp_sr_2?pf_rd_p=486539851&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B004KEIGNK&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=164A1RTRZJ2ATYABH042 > > > > > > > > > > > > -Jeff Khoury > > > > > > > > > ----- Original Message ----- > > > From: "revmaaatin" > > > To: "DSN KLR650" DSN_KLR650@yahoogroups.com> > > > Sent: Sunday, July 15, 2012 9:54:38 PM > > > Subject: [DSN_KLR650] Re: tool kit > > > > > > > > > > > > > > > > > > > > > I received a PM asking for specifics on the Crescent tool kit: > > > Cooper Hand Tools Crescent Tool Set 148 Pc Mechanics CTK148MP > > > > > > Crescent tool kit available at Amazon: ~$82; elgible for Super Saving Shipping > > > http://www.amazon.com/Crescent-CTK148MP-148-Piece-Professional-Tool/dp/B000BQMLLY/ref=sr_1_3?ie=UTF8&qid=1342412013&sr=8-3&keywords=crescent+tools > > > > > > Better price than I got 3 years ago at the local welding supply. > > > > > > Other suppliers available for ~$120 on ebay; some free shipppers. > > > > > > there is also a 170 piece set; it does not contain a set of 'dyke' side cutters, which I wanted more than 10" slip jaw pliers. > > > > > > You will have >80% fo the tools left over; put them in your regular tools as we all seem to consume sockets and wrenches over time. > > > > > > For this price, you can buy one for your wife so she is not out rooting around in your tool box trying to fix the water drip, etc. > > > See: how much money you have already saved over calling a plumber. > > > > > > revmaaatin. > > > > > > --- In DSN_KLR650@yahoogroups.com , "revmaaatin" wrote: > > > > > > > > > > > > If you really want to know what wrenches you will need, disassemble you bike with 'what you brought'. > > > > > > > > Remove the wheels, remove the side covers, seat, and tank, > > > > loosen/tighten every bolt and nut on your semi-stipped bike with only the tools in your tool kit. = engine mounting bolts, side cases, suspension system > > > > > > > > 'Fix a flat'. > > > > Use only what is on your bike. > > > > Will your tire inflation device work? > > > > > > > > IRT not wanting to carry extra sockets, Bravo. > > > > However, if you don't carry them, you will be dependent upon the benevolence of others to be prepared.... > > > > > > > > Remove the counter shaft nut; No, don't see if the counter shaft nut wrench fits, remove it. > > > > > > > > Tighten/loosen the battery terminals. > > > > (some phillips are #2, others are #3. > > > > Adjust/remove a mirror. > > > > Reposition the handle bars. > > > > > > > > Your 3/8" drive can also use 1/4" drive sockets with a little adapter. > > > > > > > > Buy good screwdrivers; tire irons (3). Add safety wire. > > > > > > > > When, you load your bike with all the goods, load the tools last. > > > > > > > > As a side note: > > > > I found an less-expensive way to build a quality tool kit without compromising my garage tools. > > > > I bought a 'Cresant' brand tool kit (on-sale) that had 90%+ > > > > of everything I needed to build a quality m/c tool kit. It was the variety that comes in a platic portfolio, with two swinging doors. > > > > The screw drivers in the kit use the hex-head points so you get several screwdrivers for the space of one handle. > > > > > > > > I supplimented the kit with a couple of big metric six-point, wrenches from Harbor Freight (sold as 8-10 wrenches-Made in India); the longer wrenches help get enough torque on the larger nuts, rather than carry one of the shorter, specalized axle wrenches (which I also own). > > > > > > > > ymmv. > > > > revmaaatin. > > > > > > > > > > > > > > > > > > > > --- In DSN_KLR650@yahoogroups.com , "bryanonfire" wrote: > > > > > > > > > > Hi, > > > > > > > > > > I'm going to need to buy a set of tools for a KLR I'm meeting in Europe soon. To do so I have gone through every KLR web site I can find, including many of the files, to find tool kit lists. When I got my '03 KLR I started a list of every tool I used while working on it, but lost that somehow. > > > > > > > > > > Here's my questions: > > > > > > > > > > 1: is there any significant difference between the E model and the older ones, as far as fasteners go? Especially axles, oil change plug, and chain service, the ones I will need most. > > > > > > > > > > 2: different kits add or leave out certain wrenches. What are the 6, 9, 11, 13, 15, for? Most kits leave them out. One calls for a 19 mm combination wrench. One kit mentions a 30mm socket. What are these for? It may just be a few ounces but I don't want to carry sockets or combinations I'll never use. > > > > > > > > > > Everything else I have already made decisions on. > > > > > > > > > > Thanks, > > > > > > > > > > Bryan > > > > > > > > > > > > > > >