Page 1 of 1
fork oil change woes
Posted: Tue May 22, 2012 6:07 pm
by Greg Jewell
I know its too late to save the nut but ALWAYS loosen your triple clamps first, if you haven't. The clamps will deform your fork just enough to make things too tight. Good luck. Greg
[Non-text portions of this message have been removed]
nklr specific
Posted: Wed May 23, 2012 12:05 am
by montequint
Fork locks, lock through wheel, covered, two well placed skate boards and your bike is merely a memory. Chained to a post with top quality chain and lock then covered is about as good as it gets. Short of the Scorpio alarm system I put on my A-16 that is. But that has it's drawbacks also.