Page 1 of 1
motorcycle and bicycle pull cable termination
Posted: Fri Feb 24, 2012 3:27 pm
by Horton Oliphant
Google something about soldering cable ends and it turns up a lot of
info, some pretty good. One guy recommends using methyl hydrate to
clean the cable before soldering. Below is a decent link to a page that
discusses motorcycle cable ends and at the bottom of the page a link to
soldering the ends on.
http://www.dansmc.com/cables.htm
Alan Henderson A13 Iowa
On 2/24/2012 2:30 PM, eddie wrote:
>
> A 10 min. trip to a HD dealer for a pre-2005 Sportster choke cable
> might be
> worth the time.
>
> eddie
>
> > [Original Message]
> > From: mechanizeinc >
> (snip)
> >
> > What the eff is the trick to getting the solder to stick to cables?
> >
> > Mech
>
[Non-text portions of this message have been removed]
supertrapp muffler ids2
Posted: Sat Feb 25, 2012 11:45 am
by snowcrash007
My 2003 KLR came with a supertrapp IDS2 when I bought it in the fall and I had to winterize it very soon after so I don't have much time on the bike so far.
I am told it is the quiet core model (but I am not sure how to verify) and I don't know how many discs are in it.
Anyone have one of these? If so how many discs is best for city/highway driving?
Crash