On 2/24/2012 2:30 PM, eddie wrote: > > A 10 min. trip to a HD dealer for a pre-2005 Sportster choke cable > might be > worth the time. >> eddie > > > [Original Message] > > From: mechanizeinc > > (snip) > > > > What the eff is the trick to getting the solder to stick to cables? > > > > Mech > [Non-text portions of this message have been removed]
motorcycle and bicycle pull cable termination
-
Horton Oliphant
- Posts: 184
- Joined: Fri Jan 25, 2008 11:43 am
motorcycle and bicycle pull cable termination
Google something about soldering cable ends and it turns up a lot of
info, some pretty good. One guy recommends using methyl hydrate to
clean the cable before soldering. Below is a decent link to a page that
discusses motorcycle cable ends and at the bottom of the page a link to
soldering the ends on.
http://www.dansmc.com/cables.htm
Alan Henderson A13 Iowa
-
snowcrash007
- Posts: 27
- Joined: Tue Dec 06, 2011 11:27 am
supertrapp muffler ids2
My 2003 KLR came with a supertrapp IDS2 when I bought it in the fall and I had to winterize it very soon after so I don't have much time on the bike so far.
I am told it is the quiet core model (but I am not sure how to verify) and I don't know how many discs are in it.
Anyone have one of these? If so how many discs is best for city/highway driving?
Crash
Who is online
Users browsing this forum: No registered users and 19 guests