Wilsons Sandbox

LinkedIn ------------ Kathleen Tyre requested to add you as a connection on LinkedIn: ------------------------------------------ Randall, I'd like to add you to my professional network on LinkedIn. - Kathleen Accept invitation from Kathleen Tyre http://www.linkedin.com/e/6vpsw7-gs91nj0m-61/nEb9G-k4S-U9WCgQCiLEmqhbPHWJiUgkraaXLtQX/blk/I197973137_9/pmpxnSRJrSdvj4R5fnhv9ClRsDgZp6lQs6lzoQ5AomZIpn8_elYTcP4PdPATej59bT95l3BUjnpUbPwPdzAUej0McjgLrCBxbOYWrSlI/EML_comm_afe/?hs=false&tok=191TygHFoawkU1 View invitation from Kathleen Tyre http://www.linkedin.com/e/6vpsw7-gs91nj0m-61/nEb9G-k4S-U9WCgQCiLEmqhbPHWJiUgkraaXLtQX/blk/I197973137_9/0VnPsPcjcTejsVckALqnpPbOYWrSlI/svi/?hs=false&tok=20SBNHBMYawkU1 ------------------------------------------ DID YOU KNOW you can use your LinkedIn profile as your website? Select a vanity URL and then promote this address on your business cards, email signatures, website, etc http://www.linkedin.com/e/6vpsw7-gs91nj0m-61/ewp/inv-21/?hs=false&tok=0L-EgVErQawkU1 -- (c) 2011, LinkedIn Corporation [Non-text portions of this message have been removed]

Fin comb at harbor Freight $5-$8 Marc ________________________________ From: "david.r.nichols@..." To: DSN_KLR650@yahoogroups.com Sent: Tuesday, September 6, 2011 12:37 PM Subject: [DSN_KLR650] How do I straighten my radiator fins? Some of my radiator fins have been bent down, it looks like someone ran their finger down the row of fins and made it so no air can pass thru. I estimate about 1/8 of the radiator is blocked like this. The screened guard was missing but I have a replacement one on the way that I bought on FleaBay. Is there a tool like you can get at Home Depot for straightening AC fins? Am I going overboard worrying about them? I do live in Texas where it gets over 100 degrees regularly... [Non-text portions of this message have been removed]

If you don't want to spring for the tool, a small, flat blade screwdriver and lots of time will work. =) eddie

> [Original Message] > From: david.r.nichols@... > To: DSN_KLR650@yahoogroups.com> > Date: 9/6/2011 1:37:55 PM > Subject: [DSN_KLR650] How do I straighten my radiator fins? > > Some of my radiator fins have been bent down, it looks like someone ran

their finger down the row of fins and made it so no air can pass thru. I estimate about 1/8 of the radiator is blocked like this. The screened guard was missing but I have a replacement one on the way that I bought on FleaBay. Is there a tool like you can get at Home Depot for straightening AC fins? Am I going overboard worrying about them? I do live in Texas where it gets over 100 degrees regularly...

> >