Wilsons Sandbox

I thought the 09 didn't need that mod?

Attachments :   They upgraded the doo but left in a weak spring design. Going with the torsion spring should make it all work like it's intended. I upgraded the doohickey along with the torsion spring and won't have to wonder.   While not a difficult task, removing the cover, starter gears and their easily misplaced washers + removing the rotor can be a bit daunting for the novice - even with the proper tools. Still, it's home garage doable if you have the tools,time & inclination. Plus, when you're done, you can affix the Eagle Mike "Have you done the do?" sticker with pride. =) eddie    

----- Original Message ----- [b]From:[/b] dougtyrone@aol.com [b]To: [/b]bejou.mn@gmail.com;DSN_KLR650@yahoogroups.com [b]Sent:[/b] 10/29/2010 12:05:43 AM [b]Subject:[/b] Re: [DSN_KLR650] Doohicky Mod (Arizona) I thought the 09 didn't need that mod?

I've done it twice...2nd time just to install torsion spring. I still have borrowed tools from Bob "nuclieye" from KLR650 forum....so I feel pretty good about showing you what to do if you're interested in learning,

--- In DSN_KLR650@yahoogroups.com, "Brad" wrote: > > Is there anybody in the Phoenix, Casa Grande, Tuscon area qualfied to do the doohicky mod with torsion spring on and 09 KLR? Thanks > > Brad > 09 KLR 650 >