Wilsons Sandbox

Wilsons Sandbox
http://www.frenchandlogan.com/phpBB3/

sixity 87- 07 klr650 fr brake pads

http://www.frenchandlogan.com/phpBB3/viewtopic.php?f=52&t=269690

Page 1 of 2

i need help pls

Posted: Tue Dec 29, 2009 4:11 pm
by ahmad
may i ask what is the best exhaust system for klr 650 model 2010,thanks alot :)

i need help pls

Posted: Tue Dec 29, 2009 4:15 pm
by Walter Mitty
Stock. If you want it to sound like a Harley you can just remove the muffler.
--- On [b]Tue, 12/29/09, ahmad [i][/i][/b] wrote: From: ahmad Subject: [DSN_KLR650] i need help pls To: DSN_KLR650@yahoogroups.com Date: Tuesday, December 29, 2009, 2:06 PM   may i ask what is the best exhaust system for klr 650 model 2010,thanks alot :)

i need help pls

Posted: Tue Dec 29, 2009 4:16 pm
by Jeff Khoury
#ygrps-yiv-1089320679 p {margin:0;}Ahmad, That depends on what your definition of "best" is.  I find that removing the tweety and replacing it with a 2" exit pipe gives a good sound and a little bit more "grunt".  Total cost is about 30 bucks. To me, the cost/benefit can't be beat. -Jeff Khoury
----- Original Message ----- From: "ahmad" To: "DSN KLR650" DSN_KLR650@yahoogroups.com> Sent: Tuesday, December 29, 2009 2:06:31 PM GMT -08:00 US/Canada Pacific Subject: [DSN_KLR650] i need help pls   may i ask what is the best exhaust system for klr 650 model 2010,thanks alot :)

i need help pls

Posted: Tue Dec 29, 2009 4:29 pm
by transalp 1
#ygrps-yiv-1861996142 p {margin:0;}   Funny Jeff should mention this. I ordered a 2" turned down exhaust tip from HMF racing only a few hours ago.     $20 for the tip. +$5 for black color (standard aluminum is no extra charge. Can be had in red, black, blue or gold.) +$7 standard UPS shipping. ----------- $32   Sure beats gambling on a $$$ slip-on muffler or full system!   eddie    
----- Original Message ----- [b]From:[/b] jeff@... Ahmad, That depends on what your definition of "best" is.  I find that removing the tweety and replacing it with a 2" exit pipe gives a good sound and a little bit more "grunt".  Total cost is about 30 bucks. To me, the cost/benefit can't be beat. -Jeff Khoury ----- Original Message ----- From: "ahmad" ahmad22q8@...  may i ask what is the best exhaust system for klr 650 model 2010,thanks alot :)

i need help pls

Posted: Tue Dec 29, 2009 4:40 pm
by Tengai Mark Van Horn
At 10:06 PM +0000 12/29/09, ahmad wrote:
>may i ask what is the best exhaust system for klr 650 model >2010,thanks alot :)
Stock for stealth.

i need help pls

Posted: Tue Dec 29, 2009 5:15 pm
by The Reverend
Simple answer - stock, with the "tweety" removed. No rejetting or expensive parts, and the weight savings doesn't matter much in a weak bike like the KLR. -----Original Message----- From: DSN_KLR650@yahoogroups.com [mailto:DSN_KLR650@yahoogroups.com] On Behalf Of ahmad may i ask what is the best exhaust system for klr 650 model 2010,thanks alot :)

i need help pls

Posted: Tue Dec 29, 2009 5:49 pm
by Jeff Khoury
#ygrps-yiv-1328144532 p {margin:0;}I am having excellent results with this combination: Tweetyectomy $0.22 mod (1 shim) Slide Drill Idle Mixture Adjust Airbox "L" mod De-Californicated It really gives the bike a lot more "snap" and low-end.  Top-end I don't really care about because the geometry of the bike is not really suited to going much faster than it does stock. -Jeff Khoury
----- Original Message ----- From: "The Reverend" To: "DSN KLR650" DSN_KLR650@yahoogroups.com> Sent: Tuesday, December 29, 2009 3:14:53 PM GMT -08:00 US/Canada Pacific Subject: RE: [DSN_KLR650] i need help pls   Simple answer - stock, with the "tweety" removed. No rejetting or expensive parts, and the weight savings doesn't matter much in a weak bike like the KLR. -----Original Message----- From: DSN_KLR650%40yahoogroups.com [mailto:DSN_KLR650%40yahoogroups.com] On Behalf Of ahmad may i ask what is the best exhaust system for klr 650 model 2010,thanks alot :)

i need help pls

Posted: Tue Dec 29, 2009 6:55 pm
by jeepaviation
The 650 will only produce so much power and upgrading only the exhaust will not increase the power equal to the cash layout. Short answer. If this KLR is new to you (2010 right) Ride it for a year. The best first mod is the pink slip. Is it paid off? And more time in the saddle will let you determine what mods are the best for you. Ride and enjoy it.
--- In DSN_KLR650@yahoogroups.com, "ahmad" wrote: > > may i ask what is the best exhaust system for klr 650 model 2010,thanks alot :) >

i need help pls

Posted: Wed Dec 30, 2009 10:48 am
by Thomas Komjathy
Jeff Did you measure the shim? I would like to know what the thickness is; I understand that .020 is about right for the shim.. What say you...Anyone, Beuller..? TK [b]From:[/b] Jeff Khoury [b]To:[/b] The Reverend [b]Cc:[/b] DSN KLR650 DSN_KLR650@yahoogroups.com> [b]Sent:[/b] Tue, December 29, 2009 6:49:27 PM [b]Subject:[/b] Re: [DSN_KLR650] i need help pls   I am having excellent results with this combination: Tweetyectomy $0.22 mod (1 shim) Slide Drill Idle Mixture Adjust Airbox "L" mod De-Californicated It really gives the bike a lot more "snap" and low-end.  Top-end I don't really care about because the geometry of the bike is not really suited to going much faster than it does stock. -Jeff Khoury
----- Original Message ----- From: "The Reverend" To: "DSN KLR650" ups.com> Sent: Tuesday, December 29, 2009 3:14:53 PM GMT -08:00 US/Canada Pacific Subject: RE: [DSN_KLR650] i need help pls   Simple answer - stock, with the "tweety" removed. No rejetting or expensive parts, and the weight savings doesn't matter much in a weak bike like the KLR. -----Original Message----- From: DSN_KLR650%40yahoogroups.com [mailto:DSN_KLR650%40yahoogroups.com] On Behalf Of ahmad may i ask what is the best exhaust system for klr 650 model 2010,thanks alot :)

i need help pls

Posted: Wed Dec 30, 2009 11:33 am
by Jeff Khoury
#ygrps-yiv-350636637 p {margin:0;}I didn't measure the shims... I went to B&B hardware in Culver City and bought some #4 brass washers.  Figured they were close enough. -Jeff Khoury
----- Original Message ----- From: "Thomas Komjathy" To: "Jeff Khoury" , "The Reverend" Cc: "DSN KLR650" DSN_KLR650@yahoogroups.com> Sent: Wednesday, December 30, 2009 8:48:11 AM GMT -08:00 US/Canada Pacific Subject: Re: [DSN_KLR650] i need help pls Jeff Did you measure the shim? I would like to know what the thickness is; I understand that .020 is about right for the shim.. What say you...Anyone, Beuller..? TK [b]From:[/b] Jeff Khoury [b]To:[/b] The Reverend [b]Cc:[/b] DSN KLR650 DSN_KLR650@yahoogroups.com> [b]Sent:[/b] Tue, December 29, 2009 6:49:27 PM [b]Subject:[/b] Re: [DSN_KLR650] i need help pls   I am having excellent results with this combination: Tweetyectomy $0.22 mod (1 shim) Slide Drill Idle Mixture Adjust Airbox "L" mod De-Californicated It really gives the bike a lot more "snap" and low-end.  Top-end I don't really care about because the geometry of the bike is not really suited to going much faster than it does stock. -Jeff Khoury ----- Original Message ----- From: "The Reverend" To: "DSN KLR650" ups.com> Sent: Tuesday, December 29, 2009 3:14:53 PM GMT -08:00 US/Canada Pacific Subject: RE: [DSN_KLR650] i need help pls   Simple answer - stock, with the "tweety" removed. No rejetting or expensive parts, and the weight savings doesn't matter much in a weak bike like the KLR. -----Original Message----- From: DSN_KLR650%40yahoogroups.com [mailto:DSN_KLR650%40yahoogroups.com] On Behalf Of ahmad may i ask what is the best exhaust system for klr 650 model 2010,thanks alot :)
All times are UTC
Page 1 of 2

Powered by phpBB® Forum Software © phpBB Limited