Page 1 of 1
30mm wrench on klr
Posted: Fri Dec 04, 2009 10:47 pm
by Steve
Can anyone tell me *where* this size wrench will fit *where* on my A19?
I know that sounds weird but what will it fit on my KLR?
30 mm.
Believe me, there is a method behind my logic on this question.
Chicobro
A19
30mm wrench on klr
Posted: Sat Dec 05, 2009 12:12 am
by E Hines
Front counter sprocket nut. The jake nut is the same size.
[b]From:[/b] Steve
[b]To:[/b]
DSN_KLR650@yahoogroups.com
[b]Sent:[/b] Fri, December 4, 2009 10:47:24 PM
[b]Subject:[/b] [DSN_KLR650] 30mm wrench on KLR
Can anyone tell me *where* this size wrench will fit *where* on my A19?
I know that sounds weird but what will it fit on my KLR?
30 mm.
Believe me, there is a method behind my logic on this question.
Chicobro
A19
30mm wrench on klr
Posted: Sat Dec 05, 2009 1:15 am
by Jeff Khoury
#ygrps-yiv-1020311413 p {margin:0;}On my '09, those are 27mm...
-Jeff Khoury
Astatic Solutions, LLC.
----- Original Message -----
From: "E Hines"
To: "Steve"
Cc: "DSN" DSN_KLR650@yahoogroups.com>
Sent: Friday, December 4, 2009 10:12:51 PM GMT -08:00 US/Canada Pacific
Subject: Re: [DSN_KLR650] 30mm wrench on KLR
Front counter sprocket nut. The jake nut is the same size.
[b]From:[/b] Steve
[b]To:[/b]
DSN_KLR650@yahoogroups.com
[b]Sent:[/b] Fri, December 4, 2009 10:47:24 PM
[b]Subject:[/b] [DSN_KLR650] 30mm wrench on KLR
Can anyone tell me *where* this size wrench will fit *where* on my A19?
I know that sounds weird but what will it fit on my KLR?
30 mm.
Believe me, there is a method behind my logic on this question.
Chicobro
A19
30mm wrench on klr
Posted: Sat Dec 05, 2009 1:22 am
by Steve
Ok, this sounds encouraging, by "front counter sprocket nut" do you mean
the "stock front chain sprocket nut"? And what is the "jake" nut?
I want to change my front sprocket to 14T, will this size wrench work? 30mm?
Bet you guys get annoyed by these new owners, don't ya?
Steve
Chico
A19
E Hines wrote:
Front counter sprocket nut. The jake nut is the same size.
[b][/b]
Can anyone tell me *where* this size wrench will fit *where* on my A19?
I know that sounds weird but what will it fit on my KLR?
30 mm.
Believe me, there is a method behind my logic on this question.
Chicobro
A19
30mm wrench on klr
Posted: Sat Dec 05, 2009 6:44 am
by Jim Douglas
In your pocket to throw at car's that cut you off!
> Can anyone tell me *where* this size wrench will fit *where* on my A19?
> I know that sounds weird but what will it fit on my KLR?
> 30 mm.
> Believe me, there is a method behind my logic on this question.
>
> Chicobro
> A19
>
>
--
*CONFIDENTIALITY NOTICE:* This email, including attachments, may include
confidential and/or proprietary information of Genesis Software and may
be used only by the person or entity to which it is addressed. If the
reader of this email is not the intended recipient or his or her
authorized agent, the reader is hereby notified that any dissemination,
distribution or copying of this email is prohibited. If you have
received this email in error, please notify the sender by replying to
this message and delete this email immediately.
30mm wrench on klr
Posted: Sat Dec 05, 2009 7:23 am
by E Hines
Yes, it is. You can order one from Fred. They are reusable locking nut that allow's you to throw away the locking washer. I will verify the nut size on mine, but I thought it was a 30 mm. Let you all know for sure later.
[b]From:[/b] Steve
[b]Cc:[/b] DSN DSN_KLR650@yahoogroups.com>
[b]Sent:[/b] Sat, December 5, 2009 1:22:56 AM
[b]Subject:[/b] Re: [DSN_KLR650] 30mm wrench on KLR
Ok, this sounds encouraging, by "front counter sprocket nut" do you mean
the "stock front chain sprocket nut"? And what is the "jake" nut?
I want to change my front sprocket to 14T, will this size wrench work? 30mm?
Bet you guys get annoyed by these new owners, don't ya?
Steve
Chico
A19
E Hines wrote:
Front counter sprocket nut. The jake nut is the same size.
[b][/b]
Can anyone tell me *where* this size wrench will fit *where* on my A19?
I know that sounds weird but what will it fit on my KLR?
30 mm.
Believe me, there is a method behind my logic on this question.
Chicobro
A19
fs: lowering links & kickstand for 87-07 klr
Posted: Fri Dec 11, 2009 10:50 am
by mbarney
Lower your bike with the dogbone links and shortened kickstand in one handy package!
I'm selling these on Ebay:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=280433772776
Thanks for looking!
-Matt