Wilsons Sandbox

Hey all- I just moved to a much smaller apartment so I gotta get rid of some of the parts that I have lying around so's I can walk through my kitchen/living room. Make an offer, if there is a price listed here, I am still open to offers... Buyer pays shipping. 1)Stock rear shock with ~9,000 miles on it. Very good condition overall. $50 2)Front Wheel: hub, laced rim, rotor, excellent condition (off 1991 KLR650 with less than 8,000 miles). $200 w/free used Gripster and new SKF double sealed bearings. 3)Triple clamps, top and bottom, no stems. I have three sets of these. They might be good for a project (mounting a WER steering dampener?). Price: cheap. 4)1989 KX250 (G1) front end. 45mm (?) conventional forks, hub, rotor, triple clamps, axle. In okay->good condition. The some of the mounting studs for the axle half-moon mounts are broken off. Probably want at least $100 for this. 5)1995 ATK front end. 43 mm USD WP forks, with front wheel, rotor, 4-pot caliper, Magura MC, stem, triples and axle. It looks like this is actually a KTM front end (triples have a "KTM" stamped on them). The forks are in very good condition, the tubes are smooth and scratch/dent free, the rim/hub looks to be in good condition as well... even an almost new Metlzer enduro tire mounted on it. $250 takes it. 6)Complete KLR650 front fork assemblies. I have two of these I think (perhaps three, depends on how many sets of fork tubes I have), includes inner and outer fork tube assemblies, springs (one set progressive), caps, fork spring preload shims, axle, speedo drive, dust wipers, oil seals, front caliper (no pads), master cylinder, all bushings and the big honking bolt at the bottom. One lucky buyer also has the option of getting a fork dissambly tool for FREE I would like $375 for each set (new upper tubes run $100/each). I might be willing to break apart the sets, please contact me about this. 7)Acerbis low mount front fender. White, works well, but I've got USD's on my KLR so it is now useless. Very good condition. $15 8)Daystar model 69 fork boots, for tubes 40-48mm in diameter. Like new, black color. $10 9)1995 KLX650C metric speedo/tach cluster with mounting frame in excellent condition. $100 10)1989 KX250 (G1) rear shock. good condition. $25 As I finish moving in I am sure that I'll find stuff I didn't know I had, but the large majority of my parts are front end and brake related. If you need something in those general areas, I might have it. Thanks, Zack

Thank you for sharring, no disrespect intended. Also thank you for giving us dibs on it. what part of the country are you in? ===== Matthew A14 Tucson AZ ----------------------------------------------------------- For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. john 3:16 __________________________________________________ Do You Yahoo!? Send FREE Valentine eCards with Yahoo! Greetings! http://greetings.yahoo.com

The tools and bead breaker have sold - Thanks to all who were interested. I still have the clutch cable. Does anyone want it for $15 - I'll pay the shipping? Email me offline if interested: bradcdavis00@... Brad --- In DSN_klr650@yahoogroups.com, "bradcdavis00" wrote:

> I was cleaning out my garage and found some stuff that someone on > the list might find useful: > > Motorcycle Bead Breaker - Made of cast iron. As you torque a 21mm > open-end wrench on the spreader assembly the two hinge ears apply

even

> pressure to the tire bead until it releases from the wheel. I've > used this only a few times and it beats the heck out of using a C > clamp or other makeshift apparatus. It comes with instructions and

is

> in > perfect shape. Chaparral Product Number: 315-0211, $35 > > The following were for my 1995 KLR but may fit earlier model years: > > Motion Pro Clutch Cable, MP 03-0204, Replaces KAW 54012-1257, brand > new and unopened, $18 > > Kawasaki Rotor Holder Wrench, #57001-1184, perfect condition, I used > it to do the balancer lever upgrade. > -and- > DS Sales Magneto puller bolt, 22mmx1.5, used but in excellent > condition. Included with these tools are a '95 balancer spring, a > '96 and later balancer spring, a '95 balancer lever and a > '95 lever > adjustment bolt. These engine parts are used but in great condition

so

> maybe someone can use them as an emergency spare. $35 > > All of the above prices include shipping. If someone wants all the > items I can let them have the whole package for $80 > > Email me offline if interested: bradcdavis00@y... > > Ride safely and thanks Brad Davis

everything is brand new besides the skid plate and windshield and shipping is included in all the prices. please email me if interested. here's a picture http://www.geocities.com/iamtonyy/klr/PC180003.JPG avon gripster 130/80t-17 paid $114 moose tube paid $11 alloy rim lock paid $13 tire rim lock and tube all for $110 avon gripster 90/90t-21paid $90 moose tube paid $16 alloy rim lock paid $13 tire rim lock and tube all for $95 dohickey parts: 2 gaskets bolt balancer lever and spring paid $88.50 all for $71 big cee ultimate blue bolt subframe kit paid $24 for $18 progressive fork springs paid $75 for $60 front and rear braided brake lines paid $88 for $71 dp rear brake pads paid $42 ebc front brake pads paid $29 premier rear brake pads paid $35 gaffler front brake pads paid $40 all for 117$ russel speed bleeders paid $15 for $10 eagle mfg'ing handle bar risers paid $30 for $23 vc throttle lock paid $24 $15 dual star brake mount billet with the bushing paid $53 for $42 magnetic drain plug paid $15 for $10 shift lever with shift pad paid $28 for $23 rear luggage rack paid $55 for $40 18" tall winshield used but in good condition paid $80 price is $80 super heavy duty skid plate used but in good condition price $90 price is $80