balancer chain is too loose
Posted: Sun Jul 06, 2008 6:04 pm
Four years ago I attempted a doohickey replacement because of some bad
noises and vibrations (engine would not run over 4,000 rpm). My
repair only lasted about 30 miles before I heard even worse noises.
When I took it apart I saw that the counter balancer chain had flopped
around taking out parts of the chain guides and some of the aluminum
from the cases. I then packed everything in a box and ordered the
parts that needed to be replaced.
Master procrastinator that I am, it is only now that I am returning to
the re-assembly. I'm finding the doohickey will not take up enough
slack in the chain. Do these balancer chains ever wear out or am I
assembling something wrong? The bike has 57,000 miles on it. I'll
send pictures of the assembly if anyone can help me.
Thanks,
Peter Dean