Wilsons Sandbox

Joe Johnson wrote:

> > Hello. > Please, please, please drop me from the DSN_KLR650 group.  You > are some great guys, but I can't get to my e-mail often enough to > check all the KLR e-mails and clear them out.  I'm leaving for > Iraq, and really would appreciate it if you would drop me completely. > Thanks!! >   > JJ > > [Non-text portions of this message have been removed] > >

Good Luck in Iraq, stay safe and you will need to go to the Yahoo Groups where you signed up and un sign yourself I believe!

JJ, Look at the bottom of any KLR group message and there's a link to unsubscribe from the group. $bob$ _____ From: DSN_KLR650@yahoogroups.com [mailto:DSN_KLR650@yahoogroups.com] On Behalf Of Joe Johnson Sent: Sunday, June 08, 2008 7:06 PM To: DSN_KLR650@yahoogroups.com Subject: [DSN_KLR650] PLEASE DROP ME FROM THE GROUP Hello. Please, please, please drop me from the DSN_KLR650 group.  You are some great guys, but I can't get to my e-mail often enough to check all the KLR e-mails and clear them out.  I'm leaving for Iraq, and really would appreciate it if you would drop me completely. Thanks!!   JJ [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]

At 03:25 AM 6/12/2008, Ed Chait wrote:

>----- Original Message ----- >From: "oldrider25" >the-wongs2453@...> >To: DSN_KLR650@yahoogroups.com> >Sent: Wednesday, June 11, 2008 8:41 PM >Subject: [DSN_KLR650] Subframe Bolt Upgrade > >I installed Eagle Mike's upgrade kit a couple weekends ago. Installation >was simple but a >PITA. I bought the two-bit -- as in two drill bit -- kit from TPI. >Drilling through the frame >with the smaller bit took about an hour with my 3/8" DeWalt cordless. >\John > >ooooooooooooooooooooooooooooooooooooooo > >This is *not* a job for a cordless drill.

Indeed. I bought a cheapo air-drill from HF for the purpose. My drilled hole came out SLIGHTLY off-center on the left side, so I definitely can't get a socket in there, but a single screwdriver jammed into the space on the closest side lets me torque the other end down just fine. I do use locktite, as I can't be sure of the correct torque values with the screwdriver side-force causing lots of drag. - Dave Svoboda, Sandy Eggo [Non-text portions of this message have been removed]

---- Joe Johnson wrote:

> Hello. > Please, please, please drop me from the DSN_KLR650 group.  You are some great guys, but I can't get to my e-mail often enough to check all the KLR e-mails and clear them out.  I'm leaving for Iraq, and really would appreciate it if you would drop me completely. > Thanks!! >   > JJ > > > > > [Non-text portions of this message have been removed] >

Enough already. Way tooo many emails every fing day

----> Please, please, please drop me from the DSN_KLR650 group.  You are some great guys, but I can't get to my e-mail often enough to check all the KLR e-mails and clear them out.  I'm leaving for Iraq, and really would appreciate it if you would drop me completely.

> Thanks!! > > > > > > [Non-text portions of this message have been removed] >