Wilsons Sandbox

Posted: **Tue Jun 26, 2007 7:02 pm**

I want a new corbin seat form my '08 and I don't need the "Dual Platform Low Saddle". I wish they made a flat seat that was an upgrade in quality to the stock seat. Corbin says that they have no plans to make anything but the Dual Platform Low Saddle for the '08. I anyone else would like a standard seat vs. the Dual Platform Low Saddle, speak up so Corbin will consider it. Thanks On Tue, 19 Jun 2007 07:46:51 -0600, "Fred Hink" said:

> There is now a third Corbin seat option for the KLR. It is called the > Dual Platform Low Saddle. You can see what this seat looks like on my > Parts Pages. > > Fred > www.arrowheadmotorsports.com > > > ----- Original Message ----- > From: Mike Truel > To: klr yahoogroups > Sent: Tuesday, June 19, 2007 7:41 AM > Subject: [DSN_KLR650] KLR650] Re:Where to buy a Corbin Flat > > > I have owned three flat corbins but am looking at a dished out model > that a friend has. I know it will be a bit lower but having never > ridden on one, what are opionions on how it feels. mt in Okla > > LD wrote: Can't speak to any differenences between > the two > Corbins, but I bought mine from TPI4X4 and like it > just fine. I was at a tech day this past spring and > there were serveral other KLR's with Corbins and I > couldn't see any differences between them and mine. > TPI and Arrowhead are both great vendors. > I went with TPI due to past experience with them and > the fact that they had a 10% off sale on everything > KLR, including Corbins, last Christmas. > I believe they have the 10% off sale every Christmas > season, but am not positive on that. > > __________________________________________________________ > Now that's room service! Choose from over 150,000 hotels > in 45,000 destinations on Yahoo! Travel to find your fit. > http://farechase.yahoo.com/promo-generic-14795097 > > Mike Truel, in Oklahoma City USA WOOF (well off older folk) > > [Non-text portions of this message have been removed] > > > > > > [Non-text portions of this message have been removed] >

--

Posted: **Wed Jun 27, 2007 7:03 am**

Honestly not sure what a "Dual Platform Low Saddle" is in comparison to a "standard seat". --- In DSN_KLR650@yahoogroups.com, "Scott St. Hillier" wrote:

> > I want a new corbin seat form my '08 and I don't need the "Dual

Platform

> Low Saddle". I wish they made a flat seat that was an upgrade in > quality to the stock seat. Corbin says that they have no plans to

make

> anything but the Dual Platform Low Saddle for the '08. I anyone

else

> would like a standard seat vs. the Dual Platform Low Saddle, speak

up so

> Corbin will consider it. > > Thanks

*snippage of everything below*

Posted: **Wed Jun 27, 2007 8:21 am**

Glad you asked, here is a link to it: http://www.corbin.com/kawasaki/klrhpyt.shtml I called corbin and they said the the seat base is different from the 08' as compared to pre-08' models. The have no plans to make the same seats for the 08'+ models as they did for the pre-08' models, instead they are just offering the "Dual Platform Low Saddle". My point is I do not have issues with the bike being "too tall", so I don't want the "Dual Platform Low Saddle", I just want a good corbin saddle that is high quality and similar in size and shape to the stock 08' saddle. Cheers On Wed, 27 Jun 2007 12:02:45 -0000, "horkdoom" said:

> Honestly not sure what a "Dual Platform Low Saddle" is in comparison > to a "standard seat". > > > --- In DSN_KLR650@yahoogroups.com, "Scott St. Hillier" > wrote: > > > > I want a new corbin seat form my '08 and I don't need the "Dual > Platform > > Low Saddle". I wish they made a flat seat that was an upgrade in > > quality to the stock seat. Corbin says that they have no plans to > make > > anything but the Dual Platform Low Saddle for the '08. I anyone > else > > would like a standard seat vs. the Dual Platform Low Saddle, speak > up so > > Corbin will consider it. > > > > Thanks > *snippage of everything below* >

--

Posted: **Wed Jun 27, 2007 8:28 am**

On 6/27/07, Scott St. Hillier wrote:

> Glad you asked, here is a link to it: > > http://www.corbin.com/kawasaki/klrhpyt.shtml

Anyone notice all the extra's on the 360 view shot on the Corbin page? Hard saddle bag mounts, highway pegs, front engine guards, barkbusters and a black metal skidplate... -- Jim Priest - central NC - 04 KLR650 'Gonzo' Checkout the KLR Resource List and Master Tool List http://www.thecrumb.com/wiki/KLR650_resources http://www.thecrumb.com/wiki/Master_tool_list

Posted: **Thu Jun 28, 2007 8:21 am**

http://groups.yahoo.com/group/DSN_KLR650/message/175251;_ylc=X3oDMTJyODllNm M1BF9TAzk3MzU5NzE1BGdycElkAzQ4ODM4NQRncnBzcElkAzE3MDUxMjYyNjIEbXNnSWQDMTc1Mj UxBHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzExODI5MDI1MDU-> Re: Low beam works high doesn't Posted by: "fasteddiecopeman" fasteddiecopeman@... http://profiles.yahoo.com/fasteddiecopeman> fasteddiecopeman Tue Jun 26, 2007 8:30 am (PST) --- In DSN_KLR650@yahoogroups.com, "pzzldpnthr" wrote:

> > Just noticed that my headlight works only on low beam. Any ideas on > the cause of this? >

Take your volt-ohmmeter and check for continuity at the male plug on the back. IF there's continuity, the problem's elsewhere. IF there's none, the beam's burnt out. Ed .Or, since you have to pull the bulb out to unplug it, replace it with a new one. My low beam went out only to find the wires had broken off at the switch. -Andy [Non-text portions of this message have been removed]

Wilsons Sandbox

low beam works high doesn't

[dsn_klr650] klr650] re:where to buy a corbin flat

[dsn_klr650] klr650] re:where to buy a corbin flat

[dsn_klr650] klr650] re:where to buy a corbin flat

[dsn_klr650] klr650] re:where to buy a corbin flat

low beam works high doesn't