left side bracket/clamp mirror holder for klr650
Posted: Sat Aug 05, 2006 9:24 pm
Hi, anyone have a used left side bracket/clamp that the mirror and
choke lever mount to? I would sure be interested in purchasing it
Thanks, D.T. Niide
Wilsons Sandbox
http://www.frenchandlogan.com/phpBB3/
http://www.frenchandlogan.com/phpBB3/viewtopic.php?f=52&t=261502
If you get nobody to offer a take-off Dual-Star sells this: "http://www.dual-star.com/index2/Brand/Kawasaki/klr%20650%20mirror%20mount.htm" Without the " & " Have seen them smoewhere else also, but lost the link. Dooden A15 Green Ape> > Hi, anyone have a used left side bracket/clamp that the mirror and > choke lever mount to? I would sure be interested in purchasing it > Thanks, D.T. Niide >
Maybe Four-Strokes only has replacement mounts ? My left side is broken also, but I had the mirrors set in only a few threads, and keep them kinda loose, when it snapped it only took out the top part, so I threaded it down all the way, next break I will need a replacement also. Dooden A15 Green Ape> > Hi, anyone have a used left side bracket/clamp that the mirror and > choke lever mount to? I would sure be interested in purchasing it > Thanks, D.T. Niide >
On 8/6/06, Dooden wrote: > --- In DSN_KLR650@yahoogroups.com, "niided" wrote: > > > > Hi, anyone have a used left side bracket/clamp that the mirror and > > choke lever mount to? I would sure be interested in purchasing it > > Thanks, D.T. Niide > > > > Maybe Four-Strokes only has replacement mounts ? > > My left side is broken also, but I had the mirrors set in only a few > threads, and keep them kinda loose, when it snapped it only took out > the top part, so I threaded it down all the way, next break I will > need a replacement also. > > Dooden > A15 Green Ape > > > > > > Archive Quicksearch at: http://www.angelfire.com/ut/moab/klr650_data_search.html > List sponsored by Dual Sport News at: www.dualsportnews.com > List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > Member Map at: http://www.frappr.com/dsnklr650 > Yahoo! Groups Links > > > > > > >
A-> > I thought everything was great. Did the Valve check & adj. on my
run> 13 a couple hundred miles ago.(3,600 miles) Not sure about it's > previous history. I set all (4) at the Max. allowable(.008 & .010 > respectively) > Only 1 intake was a little tight(.004)/ Anyway, was on a short
turned> into town when compression braking to make a slow turn, all S**t > broke loose. A very loud banging in the valve train area. I
sound> off the engine rightaway. The engine re-started with the same
2-> which increased with rpm's(only did this "not so bright thing" for
are> 3 seconds though)/Hauled it home & re-opened it. All the bolts
can> in place and everthing is at proper torque(104 inch/pounds). I
moves> duplicate the noise by moving the Front(Exh.)cam wheel & assembley > side to side(maybe 1/4"). The Back cam wheel & assembley only
The cam should not have the slop of 1/4". Is the left camshaft cap on properly? There is a groove which should fit over a lip on the cam to prevent the side to side movement. It sounds like you did slip time. On reassembly did you have the timing chain tight on the front (exhaust) cam sprocket? The slop should be between the intake sprocket and the lower end. Good Luck, Steve> slighly(est. 1/16") with no noise. > >