Wilsons Sandbox

Posted: **Wed Mar 15, 2006 10:19 pm**

I too have a new KLR with the PD Nerf bar problem. I had it installed by the dealer. Right fork makes contact with the top horizontal rail. Has anyone figured out what the fix is? If anyone has an answer, I'd greatly appreciate it. Thanks. P.S. This is a fantastic forum. Lots of knowledge can be found here. Don

Posted: **Thu Mar 16, 2006 4:07 am**

I just looked at my KLR with PD nerf bars. I put them on in Dec and the right fork also contacts the bar when turned to the right. I have not looked to see how far it is from the fork stop when it hits. It looks like you would have to cut the tab off the bar and re-weld it in a new position to stop it from hitting dbs52a wrote:

> > I too have a new KLR with the PD Nerf bar problem. I had it installed > by the dealer. Right fork makes contact with the top horizontal > rail. Has anyone figured out what the fix is? If anyone has an > answer, I'd greatly appreciate it. >

Posted: **Thu Mar 16, 2006 5:03 am**

If the genuine HT version, has anyone called Mr. Tim and see what he recommends? Guy A16 Richmond, VA -----Original Message-----

>From: Carlos Rigdon >Sent: Mar 16, 2006 8:07 AM >To: >Cc: DSN_KLR650@yahoogroups.com >Subject: Re: [DSN_KLR650] PD Nerf Bar Fit Problem > >I just looked at my KLR with PD nerf bars. I put them on in Dec and the >right fork also contacts the bar when turned to the right. I have not >looked to see how far it is from the fork stop when it hits. >It looks like you would have to cut the tab off the bar and re-weld it >in a new position to stop it from hitting > > >dbs52a wrote: >> >> I too have a new KLR with the PD Nerf bar problem. I had it installed >> by the dealer. Right fork makes contact with the top horizontal >> rail. Has anyone figured out what the fix is? If anyone has an >> answer, I'd greatly appreciate it. >>

Posted: **Thu Mar 16, 2006 7:39 am**

--- In DSN_KLR650@yahoogroups.com, "Guy B. Young II" wrote:

> > If the genuine HT version, has anyone called Mr. Tim and see what

he recommends?

> > Guy > A16 > Richmond, VA > > > -----Original Message----- > >From: Carlos Rigdon > >Sent: Mar 16, 2006 8:07 AM > >To: > >Cc: DSN_KLR650@yahoogroups.com > >Subject: Re: [DSN_KLR650] PD Nerf Bar Fit Problem > > > >I just looked at my KLR with PD nerf bars. I put them on in Dec

and the

> >right fork also contacts the bar when turned to the right. I have

not

> >looked to see how far it is from the fork stop when it hits. > >It looks like you would have to cut the tab off the bar and re-

weld it

> >in a new position to stop it from hitting > > > > > >dbs52a wrote: > >> > >> I too have a new KLR with the PD Nerf bar problem. I had it

installed

> >> by the dealer. Right fork makes contact with the top

horizontal

> >> rail. Has anyone figured out what the fix is? If anyone has

an

> >> answer, I'd greatly appreciate it. > >> >

I installed mine almost a year ago at CMC. I never even noticed this problem till it was brought up some time ago. I went and checked and the right fork tube does make contact, but just. With slight pressure I can still use the steering lock. It has never been a concern when riding. Just my 2 cents worth.

Posted: **Thu Mar 16, 2006 12:49 pm**

For Sale: 2002 Kawasaki KLR 650 ~7300 miles Excellent Condition! Very well maintained, recently changed oil and filter. Includes: All original and stock items included Kawasaki KLR Tank Bag Kawasaki KLR Tail Bag Kawasaki + 4" Windscreen New Avon Gripster Tires New Spare Front Tube Moose Shift lever Clymer Manual 16t sprocket Eagle Manufacturing Chain Balancer lever and Spring Upgrade (Doohicky) Sub Frame bolt upgrade Odyssey Sealed Gel Battery $ 3700.00 The bike is located in Colorado Springs, CO Please call or E-mail me with questions or requests. Thanks, Dave Flaks 719-331-0660 davidflaks@...

Wilsons Sandbox

for sale: 2002 klr 650 - colorado springs, co

pd nerf bar fit problem

pd nerf bar fit problem

pd nerf bar fit problem

pd nerf bar fit problem

for sale: 2002 klr 650 - colorado springs, co