Wilsons Sandbox

><><><><><><><>

> > Just finished the swingarm maint/repacking. > > Noticed my chainguard (12053-1360 / GUIDE-CHAIN,DRIVE,FR) has a goodly > sized chunk taken out of it. > > http://www.tonyjones.com/klr/chainguard.jpg > > Is this from a poorly adjusted chain? I was looking at how it fits > onto the swingarm trying to figure out where in the swingarm travel > the problem was but couldn't quite figure it out. > > A new one looks to be $22 from Ron Ayers but is there a more durable > aftermarket one available? Couldn't see anything at Arrowhead. > > Tony >

> Hi Tony, > > I have not tried this product > > http://www.geocities.com/twowheelwandering/dirtly.html > > but another lister > <><><><><><><>><> > SNIP > > Message: 22 > Date: Tue, 30 Nov 2004 17:37:11 -0000 > From: "Jim" > Subject: Re: General Parts Question > > Here is a picture of the poly sliders. > http://www.geocities.com/twowheelwandering/dirtly.html > I wound up calling dirtly but didn't keep the number, sorry. > --Jim > A-15

--- In DSN_KLR650@yahoogroups.com, "Tony Jones" wrote: > > Hehehehe. I actually saw "Formtech Services (formerly Dirtly) > Polyurethane chain guides" in the FAQ and went to the webpage but it > said it was for graphic arts supplies. I guess I didn't dig deeply > enough before posting.... hmmn, the dirtly.com webpage is odd too. > > I guess I'll have to e-mail them, but yes, from the looks of the > twowheelwandering pics, it's exactly what I want. > > I should check my rear guide too, see if that needs replacing. Maybe > the Scott oiler tubing will stick better to it than to the stock > > Thanks > > Tony > > > Hi Tony, > > > > I have not tried this product > > > > http://www.geocities.com/twowheelwandering/dirtly.html > > > > but another lister > > <><><><><><><>><> > > SNIP > > > > Message: 22 > > Date: Tue, 30 Nov 2004 17:37:11 -0000 > > From: "Jim" > > Subject: Re: General Parts Question > > > > Here is a picture of the poly sliders. > > http://www.geocities.com/twowheelwandering/dirtly.html > > I wound up calling dirtly but didn't keep the number, sorry. > > --Jim > > A-15 >

--- In DSN_KLR650@yahoogroups.com, Krgrife@... wrote: > > > In a message dated 3/11/2006 5:11:56 P.M. Pacific Standard Time, > mjearl@... writes: > > I have not tried this product > > http://www.geocities.com/twowheelwandering/dirtly.html > > > I'm using Dan Oakes chain slide (_www.dirtly.com_ (http://www.dirtly.com) ) > and it has been very durable. Easy installation without removing the swing > arm. > Kurt > > > [Non-text portions of this message have been removed] >

--- In DSN_KLR650@yahoogroups.com, "revmaaatin" wrote: > > Hi Kurt, > How did you get to where the slider is actually offered. Maybe I am > missing something here? Sometimes I am unable to see the > obvious...Is it obvious where the slider-for-sale is located? > > revmaaatin. >

> > You might want to contact Dan at danoaks@... and ask him. > > I got my handlebar risers from him. He also has listings on ebay

> the name "bierdo". > > -Mike > > > --- In DSN_KLR650@yahoogroups.com, "revmaaatin" wrote: > > > > Hi Kurt, > > How did you get to where the slider is actually offered. Maybe I

> > missing something here? Sometimes I am unable to see the > > obvious...Is it obvious where the slider-for-sale is located? > > > > revmaaatin. > > >

----- Original Message ----- From: "revmaaatin" To: DSN_KLR650@yahoogroups.com> Sent: Saturday, March 11, 2006 9:34 PM Subject: [DSN_KLR650] Re: front chainguard | Hi Tony, | I also noted the link was a tad odd, and never really told you how to | buy the slider. If you get it figured out, out to get this product | if it is actually available, let me know. I think I will order it | for a spare, based on the wear on my bike. | | | revmaaatin. | | --- In DSN_KLR650@yahoogroups.com, "Tony Jones" wrote: | > | > Hehehehe. I actually saw "Formtech Services (formerly Dirtly) | > Polyurethane chain guides" in the FAQ and went to the webpage but it | > said it was for graphic arts supplies. I guess I didn't dig deeply | > enough before posting.... hmmn, the dirtly.com webpage is odd too. | > | > I guess I'll have to e-mail them, but yes, from the looks of the | > twowheelwandering pics, it's exactly what I want. | > | > I should check my rear guide too, see if that needs replacing. | Maybe | > the Scott oiler tubing will stick better to it than to the stock | > | > Thanks | > | > Tony | > | > > Hi Tony, | > > | > > I have not tried this product | > > | > > http://www.geocities.com/twowheelwandering/dirtly.html | > > | > > but another lister | > > <><><><><><><>><> | > > SNIP | > > | > > Message: 22 | > > Date: Tue, 30 Nov 2004 17:37:11 -0000 | > > From: "Jim" | > > Subject: Re: General Parts Question | > > | > > Here is a picture of the poly sliders. | > > http://www.geocities.com/twowheelwandering/dirtly.html | > > I wound up calling dirtly but didn't keep the number, sorry. | > > --Jim | > > A-15 | > | | | | | | | | Archive Quicksearch at: http://www.angelfire.com/ut/moab/klr650_data_search.html | List sponsored by Dual Sport News at: www.dualsportnews.com | List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html | Member Map at: http://www.frappr.com/dsnklr650 | Yahoo! Groups Links | | | | | | | | | -- | No virus found in this incoming message. | Checked by AVG Free Edition. | Version: 7.1.375 / Virus Database: 268.2.1/279 - Release Date: 3/10/06 | | -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 268.2.1/279 - Release Date: 3/10/06

> Date: Sat, 11 Mar 2006 22:25:50 -0600 > From: "Dail" > Subject: Re: Re: front chainguard > > > Try this link > > http://www.poly-pros.com/kawasaki2.asp