Wilsons Sandbox

> Kawasaki started changing the thickness of there cylinder liner in 1996 > for the KLR650s. I have a 1996 and am wondering whether I have the > newer cylinder liner or the older one. Dose anyone have a speck > thickness on the newer liner or know the Engine serial numbers when the > newer liners were used? > > > > > > > > Archive Quicksearch at: http://www.angelfire.com/ut/moab/klr650_data_search.html > List sponsored by Dual Sport News at: www.dualsportnews.com > List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > Member Map at: http://www.frappr.com/dsnklr650 > Yahoo! Groups Links > > > > > >

On Feb 19, 2006, at 8:24 PM, Chris Jennings wrote: > Wonder if they sneaked in any other minor changes? > > On 2/19/06, a14@... wrote: >> >> I was looking at the parts diagrams for the 2006 KLR650 and found >> that it >> is not listed as an A20 as most assume it would be. Kawasaki calls >> it an >> A6F (A6FL for California emissions) so the correct manufacturer model >> ID >> would be KL650A6F which should be on the frame by the serial number. >> KLR650 >> is the marketing model name. >> >> Walt >> >> >> >> >> Archive Quicksearch at: >> http://www.angelfire.com/ut/moab/klr650_data_search.html >> List sponsored by Dual Sport News at: www.dualsportnews.com >> List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html >> Member Map at: http://www.frappr.com/dsnklr650 >> Yahoo! Groups Links >> >> >> >> >> >> >> > > > [Non-text portions of this message have been removed] > > > > Archive Quicksearch at: > http://www.angelfire.com/ut/moab/klr650_data_search.html > List sponsored by Dual Sport News at: www.dualsportnews.com > List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > Member Map at: http://www.frappr.com/dsnklr650 > Yahoo! Groups Links > > > > > >