Page 1 of 1
fs: 2001 klr 650 w/ > $4000 in extra's in the sf bay area $3450
Posted: Sun Oct 23, 2005 10:29 pm
by John Kokola
"Kosmann [sic] front shocks" ... Does this mean the Kosman adjustable
triple trees?
--John Kokola
jkhoei wrote:
fs: 2001 klr 650 w/ > $4000 in extra's in the sf bay area $3450
Posted: Sun Oct 23, 2005 10:34 pm
by jkhoei
No, it means Kosman engineering rebuilt the front shocks. I guess I
misspelled. I'll double check and correct, Thanks.
fs: 2001 klr 650 w/ > $4000 in extra's in the sf bay area $3450
Posted: Sun Oct 23, 2005 10:37 pm
by John Kokola
I was just curious ... sounds like a great bike!
--John Kokola
jkhoei wrote:
fs: 2001 klr 650 w/ > $4000 in extra's in the sf bay area $3450
Posted: Mon Oct 24, 2005 10:06 am
by Jim
Not a big deal but looks like a 2000 to me.
--Jim
A-15 with silver tank.
fs: 2001 klr 650 w/ > $4000 in extra's in the sf bay area $3450
Posted: Tue Oct 25, 2005 10:44 pm
by jkhoei
Actually I just ran the numbers and came up with $3,943.54 worth of
extra's (some parts are not listed, but not many).
Send me an e-mail if you want a copy of the excel sheet.
joe at khoei dot com
Cheers,
Joe
install corbin dish seat, now head, tail & lic. plate light doe
Posted: Thu Oct 27, 2005 5:04 pm
by Randy Phillips
You most likely blew the 10amp fuse under the seat
for the headlight. There is a spare in the rubber
unit.
Check it out.
Randy
Idaho - A17
-----Original Message-----
From:
DSN_KLR650@yahoogroups.com
[mailto:
DSN_KLR650@yahoogroups.com] On Behalf Of
karl_rrventure
Sent: Thursday, October 27, 2005 3:26 AM
To:
DSN_KLR650@yahoogroups.com
Subject: [DSN_KLR650] Install Corbin Dish Seat,
now head, tail & lic. plate light does not work?
Thought it would be a simple procedure, taking off
stock seat replaceing with new corbin dish seat.
First the seat bolt wholes would not line up. Had
to put weight on each side of the seat while I
fidgeted the bolts in place. Then when I started
the bike, it starts fine, I notice the head light
was off. Everything else works, blinker, horn,
brake light & starter. Both fuses under seat are
fine. I have checked the creamy white wire plug
that is located towards the back side under the
seat. It appears to be connected fine.
Has anyone else had this problem? Does anyone
have a solution or
suggestion? Any input is greatly appreciated.
Thanks,
-Karl
Archive Quicksearch at:
http://www.angelfire.com/ut/moab/klr650_data_searc
h.html
List sponsored by Dual Sport News at:
www.dualsportnews.com
List FAQ courtesy of Chris Krok at:
www.bigcee.com/klr650faq.html
Yahoo! Groups Links
DSN_KLR650-unsubscribe@yahoogroups.com