Wilsons Sandbox

Not sure about the KTM fender, but I just put this Acerbis Supermotard version on my '01: http://www.acerbis.com/p149_universal/168033.html

>From: "Randy Shultz" >To: DSN_KLR650@yahoogroups.com >Subject: [DSN_KLR650] KTM front fender >Date: Wed, 12 Oct 2005 14:31:11 -0000 > >Anybody remember which Acerbis/KTM fender model fits the KLR? > > > > > >Archive Quicksearch at: >http://www.angelfire.com/ut/moab/klr650_data_search.html >List sponsored by Dual Sport News at: www.dualsportnews.com >List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > > >Yahoo! Groups Links > > > > > > > >

_________________________________________________________________ Is your PC infected? Get a FREE online computer virus scan from McAfee Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963

On 10/12/05, Randy Shultz wrote:

> Anybody remember which Acerbis/KTM fender model fits the KLR?

KTM SX/EXC Front Fender Silver 5030801010090

--- In DSN_KLR650@yahoogroups.com, "Randy Shultz" wrote:

> > Anybody remember which Acerbis/KTM fender model fits the KLR?

Acerbis KTM front fender, black, part number 15830805, $22.99 at Rocky Mountain ATV. No drilling, just four bolts.

Anyone have a picture of this fender installed?

--- In DSN_KLR650@yahoogroups.com, "Randy Shultz" wrote: > Anybody remember which Acerbis/KTM fender model fits the KLR? Acerbis KTM front fender, black, part number 15830805, $22.99 at Rocky Mountain ATV. No drilling, just four bolts.

A couple of people asked for the jetting I am running with my FMF Q. Here is what I have; a FMF Q S/A Modular Muffle with a Big Gun Header pipe (I do not think it made any improvements, but looks cool). I have cut out the air box and run a UNI foam air filter and for jetting, I used a Dynojet kit using stage 1 with DJ140 main jet. This has greatly improved my KLR performance and ride ability and I went from an average of 40/44 mpg to 52 mpg. Now take in account that this is done with a Seat of the pants dyno, I think that is all that matters. Bryan Pospisil Mesa, AZ -----Original Message----- From: DSN_KLR650@yahoogroups.com [mailto:DSN_KLR650@yahoogroups.com] On Behalf Of Maurice P. Cruz Sent: Tuesday, October 11, 2005 3:07 AM To: DSN_KLR650@yahoogroups.com Subject: FW: [DSN_KLR650] Re: FMF Q Bryan, Am also considering a FMF but am put off by having to rejet and lose the stock reliability and fuel economy. Seems you got to have your cake and eat it too. Please elaborate on your rejetting setup; did you use a dynojet kit, what did you actually change in the carb, etc? Thanks in advance, and regards, Maurice

--- In DSN_KLR650@yahoogroups.com, "Bryan" wrote: > > I installed FMF Q on a 04 and love it, I have rejetted and opened the air > Box and love it more. It did not need to be rejetted it ran fine with out > it. In addition, I was always told do not to mod the engine, no power gain > for the mileage loss, well I love the power and I went from an average of > 44 mpg. to 52 mpg. > > Bryan Pospisil > Mesa, AZ Archive Quicksearch at: http://www.angelfire.com/ut/moab/klr650_data_search.html List sponsored by Dual Sport News at: www.dualsportnews.com List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html Yahoo! Groups Links