Page 1 of 1
frame, please help!
Posted: Thu Oct 13, 2005 7:07 am
by Fernando Silveira
Hello!
Anybody can tell me if de frame of the KLR 650 C model is the same as the KLR
650 A model?
Regards!
Fernando Silveira
Portugal - Azores
___________________________________________________________________
O SAPO j est livre de v rus com a Panda Software, fique voc tamb m!
Clique em:
http://antivirus.sapo.pt
easy bead breaking
Posted: Thu Oct 13, 2005 8:00 am
by Jeff Saline
Listers,
Just got this link from another list.
http://www.webbikeworld.com/t2/bead-breaker/motorcycle-tire-bead-breaker.
htm
Shows a guy breaking the bead on a motorcycle wheel/tire with a couple of
2X4s and a car. Using the long 2x4 as a lever and the car as something
handy to place one end of the lever under. I suppose it might work ok.
I'd be careful if I tried it and would support the rim where I was
pressing down. I'd guess the force could be enough in some situations to
bend a rim if a bead was stubborn and lots of force was used.
Best,
Jeff Saline
ABC # 4412 South Dakota Airmarshal
Airheads Beemer Club
www.airheads.org
The Beautiful Black Hills of South Dakota
75 R90/6, 03 KLR650, 79 R100RT