Page 1 of 1
mini turn signals
Posted: Sun Sep 18, 2005 1:49 pm
by rxm98
I bought some of these off Ebay, but after hooking them up, they don't
flash.
Can anyone help me out with correctly installing these so that they
flash when the blinker is on.
Thanks
mini turn signals
Posted: Sun Sep 18, 2005 1:56 pm
by Chris
Are they lower wattage than the stock bulbs?
The flasher is a thermal flasher that depends on a certain load in
order to flash.
If you reduce the voltage you need to go to an electronic relay/flasher.
I don't have part numbers for you, but others might that have done LED
conversions.
mini turn signals
Posted: Sun Sep 18, 2005 5:04 pm
by rxm98
I believe they are lower wattage at 6W per bulb. I have an old stock
one rated at 50W.
mini turn signals
Posted: Mon Sep 19, 2005 5:49 am
by kurt thomas
does anyone else want a copy?
----- Original Message -----
From: Kurt Thomas
To: rxm98@...
Sent: Monday, September 19, 2005 6:50 AM
Subject: Re: Mini Turn Signals
enclosed is a pic and a powerpoint how-to
Message: 21
Date: Sun, 18 Sep 2005 18:49:24 -0000
From: "rxm98"
Subject: Mini Turn Signals
I bought some of these off Ebay, but after hooking them up, they don't
flash.
Can anyone help me out with correctly installing these so that they
flash when the blinker is on.
Thanks
[Non-text portions of this message have been removed]
mini turn signals
Posted: Mon Sep 19, 2005 9:18 pm
by telliott@aol.com
In a message dated 9/19/2005 5:30:04 P.M. Central Daylight Time,
DSN_KLR650@yahoogroups.com writes:
From: "Kurt Thomas"
Subject: Re: Mini Turn Signals
does anyone else want a copy?
YES, I'd really like to have it. I tried some LED signals and changed the
flasher to an electronic one and it still wouldn't flash.
Thanks, Terry
[Non-text portions of this message have been removed]
klr handle bar risers
Posted: Tue Sep 20, 2005 8:57 am
by a14@att.net
I am using the Eagle risers (7/8") with 'ATV High' bars. This combo is the highest you can go unless you use taller risers. All cables reach fine with minor adjustment except the choke cable but that was not a problem for me with the push to cancel turn signal/headlight switch which relocates the choke lever. A choke lever and bracket is available separately if you need to relocate it inboard using the stock switch housing.
Walt
-------------- Original message ----------------------
From: Luc Legrain
> Hey Guys ,
> How high can you raise the handle bar before you have to get longer cables ?
> Thanks.
>