Page 1 of 1
bearing noise aftre rearwheel change
Posted: Sat Aug 27, 2005 9:35 am
by bill coughlin
I was hoping someone could help solve what appears to be a problem with putting the rear tire back on my 2001 KLR650 Bearings making clicking noise is there any thing that would cause this like sprocket alignment any information would be appreciated not sure it is on correctly thanks BillyBBuffalo
---------------------------------
Find your next car at Yahoo! Canada Autos
[Non-text portions of this message have been removed]
battery leaking!
Posted: Sat Aug 27, 2005 9:51 am
by clutz003
Make sure that the overflow tube that comes out from the battery is
connected to the tube that runs the bad stuff down under the bike.
When my bike was new it was not connected (probably a dealer setup
issue) and it corroded the passenger footpeg and the mounting
bracket. The dealer replaced these as warranty items.
Craig
A18
San Jose CA
--- In
DSN_KLR650@yahoogroups.com, "pinemtklr" wrote:
> I have had problems with my stock battery leaking out on the side of
> my KLR. It has done this sense I purchased the bike in July. I have
> checked the fluid level and it does not appear to be over filled and
> all plugs are in tight. It is starting to spot the paint on the
> subframe. Has anyone else had this problem and is this something the
> dealer should fix?