Wilsons Sandbox

Posted: **Tue Jun 07, 2005 9:35 pm**

--- In DSN_KLR650@yahoogroups.com, "John Thompson" wrote:

> SNIP>>>>>>> > Thanks for the help & I am happy to call someone if it's easier to

take your

> response verbally (hit me offline with your #)! > > John in CO

John, I'm the guy that makes the kit. You can call me 619 261 1281, if you'd like. In the instructions, I think I recommend approx 5/16 to 3/8 stretch from the relaxed position for the spring. If the eccentric shaft came out - which is what it sounds like - you may have dropped a washer into the sump. I have a text step by step with info on the www.leftcoastklrs.com website, you may find useful. Hope this helps, Mike Eagle Mfg & Eng

Posted: **Wed Jun 08, 2005 12:09 am**

Hi, All So, how does one go about cleaning and oiling the chain? Do you need to remove the chain to do it? Does it come with an invisible removable link? If you do need to take it off, how do you do that? (My other bike, which does not have one of those nasty things, and does do awesome wheelies, and does not produce smoke, is a BMW 1150RT). Regards, Larry in Idaho, A19

Wilsons Sandbox

in the middle of doohickey swap & have questions

in the middle of doohickey swap & have questions

chain cleaning and oiling