[dsn_klr650] upperengine mount
Posted: Mon May 30, 2005 1:43 pm
Thanks for the answer but you don't really answer to my question. Maybe my
english is not really clear (I first language is french...).
I am looking precisely at the position of the "J" shaped plate which fasten
the lowest bolt.
Hope my question is clearer.
Pascal
-----Original Message-----
From: W.V. Doran [mailto:wonholly@...]
Sent: 30 mai 2005 12:59
To: Pascal Le Pesant
Subject: Re: [DSN_KLR650] Upperengine mount
Pascal...Facing forward (clutch lever on the left/brake lever on the
right)It apears that the bolts go thru from the right side and the nuts
attach from the left side.
I'll take a look at mine and see for sure. If I don't repost it's correct.
--- Pascal Le Pesant wrote:
WVDoran Scottsdale, AZ __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com> There are two regular bolts and one bolt with a nut shaped as a "J". > Which side of the nut should I apply to the engine mount plate ? It is > not clear on the kawasaki part detail: > http://www.connexite.net/klr650/Engine_mount.GIF > > Thanks for your help. > > Pascal, Quebec, KLR 650 1996.
