nklr super sherpa brake pedal problem.
Posted: Fri May 27, 2005 7:33 pm
I have a project super sherpa I'm working on and have run into a real
PITA problem. It seems that the break pedal really stuck inside the
housing. The way the pedal is attached on the sherpa is via a pin
that is welded to the pedal and inserted into the frame. It seems
that it's pretty rusted and won't come out. The pedal will move up
and down but only if I put all my weight on it or hit it with a
hammer. And then it'll just stay in place as the springs are not
strong enough to pull it back. I sprayed the hell out of it with WD
40 and prying it off but it'll only bend the pedal. I'm not sure how
to get this thing out. Any help would be greatly appreciated. Thanks.