Wilsons Sandbox

Posted: **Sun Mar 27, 2005 1:15 pm**

--- In DSN_KLR650@yahoogroups.com, "steve" wrote:

> > Hi guys...Got my bike running real well with the dyno kit but have > problem with air/fuel mix screw...i set it at 1.5 turns but for some > reason it appears that whilst i ride it changes it position out.?? > Sometimes when i check its out to 35 turns would this be a faulty > spring??Can i turn th screw all the way out to check or??many thanks

Steve, Sounds like it's missing the oring on the screw. The friction on the oring helps keep it from moving, also seals the hole. All the best, Mike

Posted: **Sun Mar 27, 2005 1:26 pm**

Well, that was a big mistake, went out in the garage, and lifted the bike straight up and down, and the oil came up to past the top of the sight glass--thanks all, I didn't realize the sight glass was calibrated with the bike straight up and down, makes sense..so that will save the biek a trip to the shop. I mentioned the bike has power to pull wheelies, I didn't mean I was riding wheelies, I only did one quickly, just meant the biek seemed to have plenty of power..lol. So the second problem is quite real, with the problems starting, I will charge the battery overnight and see if that cures it--thanks everyone --------------------------------- Do you Yahoo!? Make Yahoo! your home page [Non-text portions of this message have been removed]

Wilsons Sandbox

air/fuel mix screw

air/fuel mix screw

oil blowing and hars start-thanks